TEN 60-2411 TRACOPOWER, TEN 60-2411 Datasheet - Page 2

• Manufacturer Part Number: TEN 60-2411
• Description: DC/DC Converter
• Manufacturer: TRACOPOWER

Specifications of TEN 60-2411

• Dc / Dc Converter O/p Type: Fixed
• No. Of Outputs: 1
• Input Voltage: 18VDC To 36VDC
• Power Rating: 60W
• Output Voltage: 5V
• Output Current: 12A
• Approval Bodies: CUL, EN, IEC, UL
• Supply Voltage: 24V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Input Specifications
Input current at no load
Input current at full load
(nominal input 24/48 Vin)
Input voltage variation (dv/dt)
Start-up voltage / under voltage lockout
Surge voltage (100 msec. max.)
Conducted noise (input)
ESD (input)
Fast transient (input)
Surge (input)
Output Specifications
Voltage set accuracy
Output voltage adjustment
Regulation
Temperature coefficient
Ripple and noise (20 MHz Bandwidth)
Start up time (nominal Vin and constant resistive load)
Transient response time (25% load change)
Short circuit protection
Over load protection
Thermal shutdown
Over voltage protection
Capacitive load output models
General Specifications
Temperature ranges
Derating
Humidity (non condensing)
Reliability, calculated MTBF (MIL-HDBK-217 F)
– Input variation Vin min. to Vin max.
– Load variation 0 – 100 %
– Operating
– Case temperature
– Storage
12V & 15 V output models: 2900 /1450 mA typ.
12 V & 15 V outputs: 100 mVpk-pk max.
3.3 V output models: 2250 /1150 mA typ.
3.3 V & 5 V outputs: 75 mVpk-pk max.
24 Vin models: 17 VDC / 15 VDC typ.
48 Vin models: 34 VDC / 32 VDC typ.
24 Vin models: 50 V
48 Vin models: 100 V
24 V models: 120 mA typ.
48 V models: 100 mA typ.
5.0V models: 2850 /1450 mA typ.
3.3 V output: 3.7 V
12 V output: 13.5 V
15 V output: 16.8 V
5 V output: 5.6 V
5 V/ms, max.
(complies with ETS300 132 part 4.4)
EN 55022 level A, FCC part 15, level A with
external capacitor (see note 1)
EN 61000-4-2, perf. criteria B
EN 61000-4-4, perf. criteria B
EN 61000-4-5, perf. criteria B
± 1%
± 10%
0.2% max.
0.5% max.
± 0.02%/K max.
20 ms typ.
250 µs typ.
indefinite (automatic recovery)
150% of Iout max typ.
@ 110°C typ
tba
– 40 °C ... + 85 °C
+ 105 °C max.
– 55 °C ... + 125 °C
see graph on page 3
95 % rel H max.
> 110’000 h @ + 25 °C
DC/DC Converters
TEN 60
Page 2 of 4
60 Watt