SNAP-AIRTD OPTO 22, SNAP-AIRTD Datasheet - Page 26

• Manufacturer Part Number: SNAP-AIRTD
• Description: I/O Module
• Manufacturer: OPTO 22
• Type: Inputr

Specifications of SNAP-AIRTD

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Signal Input Type: 100 Ohm RTD
• Resolution: 0.042°C
• No. Of Analog Inputs: 2
• Brand/series: SNAP Series
• Connection To Host: Backplane
• Current, Input: 190 mA
• Dimensions: 82.55mmL×18.29mmW×90.17mmH
• Input: 100 Ohms
• Input Type: Analog
• Input, Range: 100 Ohms
• Mounting Type: PCB
• Number Of Channels: 2
• Primary Type: Control
• Response Time: 25 ms
• Special Features: Transformer Isolation, Optical Isolation, RTD Input
• Temperature Range: -200 to +850 °C
• Temperature, Operating, Maximum: 0 to 70 °C
• Voltage, Isolation: 1500 V
• Voltage, Supply: 5 VDC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

PAGE
26
Voltage Input Module, -10 VDC to +10 VDC or -5 VDC to +5 VDC,
32 Channels
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX [phone] • [e-mail] • SUPPORT 800-835-6786 • 951-695-3080 • FAX [phone] • [e-mail]
© 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
Specifications
Input Range
Over-Range Limits
Resolution
Input Filtering
Data Freshness (Max) 1.1 s
DC Common Mode
Rejection
AC Common Mode
Rejection
Maximum Survivable
Input
Maximum Operating
Common Mode Volt-
age
Accuracy
Gain Temperature
Coefficient
Offset Temperature
Coefficient
Isolation
Power Requirements
Input Resistance
Ambient Temperature:
Torque,
hold-down screws
Torque,
connector screws
Agency Approvals
Warranty
Operating
Storage
From -10 volts to +10 volts
From -5 volts to +5 volts
From -11 to +11 volts (+/-10 V range)
From -5.5 to +5.5 volts (+/-5 V range)
0.4 mV when configured -10 to +10 volts
0.2 mV when configured -5 to +5 volts
-3 dB @ 31 Hz
>-120 dB
>-120 dB @ 60 Hz
220 VAC or 300 VDC
250 V
0.05%, 5 mV @ 10 VDC
2.5 mV @ 5 VDC
30 PPM/ °C
15 PPM/ °C
1500 V
5 VDC (±0.15) @ 150 mA
1 M ohms (each channel; all channels
share the same reference point)
0 °C to 70 °C
-25 °C to 85 °C
4 in-lb (0.45 N-m)
5.26 in-lb (0.6 N-m)
SNAP-AIV-32: UL, CE, RoHS, DFARS
SNAP-AIV-32-FM: FM, CE, RoHS,
DFARS
Lifetime
Description
The SNAP-AIV-32 and SNAP-AIV-32-FM modules can be
configured for either -10 VDC to +10 VDC or -5 VDC to +5 VDC
operation on each of its 32 channels. See the table on
for I/O processor compatibility. The SNAP-AIV-32-FM is Factory
Mutual approved.
Note that all channels share a common reference terminal.
(For channel-to-channel isolated modules, see Opto22 form
#1182.)
SNAP TEX cables and a breakout rack are available separately
for wiring points to field devices (see form #1756, the SNAP TEX
Cables & Breakout Boards Data Sheet). The SNAP-HD-BF6 wiring
harness connects the module to the breakout rack, which can
then be wired to field devices. The SNAP-HD-CFB6 wiring
harness has flying leads to connect to field devices.
See the dimensional drawing for the module on
Part Number
SNAP-AIV-32
SNAP-AIV-32-FM
SNAP-HD-CBF6
SNAP-HD-BF6
SNAP-AIV-HDB
SNAP-AIV-HDB-FM
SNAP Analog Input Modules
Description
32-channel analog voltage input -10 to
+10 VDC
Wiring harness with flying leads for
SNAP-AIV-32 modules
Wiring harness for SNAP-AIV-32 mod-
ules and SNAP-AIV-HDB breakout racks
Breakout racks for SNAP-AIV-32 and
SNAP-AIV-32-FM
page
page 3
35.