CPM2C-20C1DR-D Omron, CPM2C-20C1DR-D Datasheet - Page 13

• Manufacturer Part Number: CPM2C-20C1DR-D
• Description: Micro Programmable Logic Controller
• Manufacturer: Omron

Specifications of CPM2C-20C1DR-D

• Output Type: Relay
• External Width: 33mm
• Supply Voltage Max: 24VDC
• External Depth: 65mm
• Mounting Type: DIN Rail
• External Height: 90mm
• Approval Bodies: UL, CSA, CE
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

J TRANSISTOR OUTPUTS (NPN OR PNP)
For CPUs and Expansion I/O Modules
Item
Max. switching capacity
Min. switching capacity
Max. inrush current
Leakage current
Residual voltage
ON delay
OFF delay
Fuse
Circuit configuration
A--104
Micro Programmable Controller
Note: When using OUT01000 or OUT01001 as a pulse output, connect a dummy resistor as required to
Specification
CPUs with 10 or 20 I/O points:
OUT01000 to OUT01007: 40 mA/4.5 VDC to 300 mA/20.4 VDC, 300 mA (20.4 VDC to 26.4 VDC)
CPUs with 32 I/O points:
OUT01000 to OUT01007: 40 mA/4.5 VDC to 300 mA/20.4 VDC, 300 mA (20.4 VDC to 26.4 VDC)
OUT01100 to OUT01107: 40 mA/4.5 VDC to 100 mA/20.4 VDC, 100 mA (20.4 VDC to 26.4 VDC)
Expansion I/O Modules:
OUT01j00 to OUT01j07: 40 mA/4.5 VDC to 300 mA/20.4 VDC, 300 mA (20.4 VDC to 26.4 VDC)
OUT01j08 to OUT01j15: 40 mA/4.5 VDC to 100 mA/20.4 VDC, 100 mA (20.4 VDC to 26.4 VDC)
0.5 mA
0.9 A for 10 ms (charging and discharging waveform)
0.1 mA max.
0.8 V max.
OUT01000 and OUT01001:
OUT01002 and up:
OUT01000 and OUT01001:
OUT01002 and up:
1 fuse for each 2 outputs (The fuse cannot be replaced by the user.)
NPN Outputs
PNP Outputs
bring the load current between 10 and 150 mA. If the load current is below 10 mA, the ON/OFF
response time will be longer and high-speed pulses will not be output.
The transistor will heat if used at 150 mA or higher, possibly damaging elements.
CPM2C
20 µs max.
0.1 ms max.
40 µs max. for 10 to 300 mA
0.1 ms max. for 0.5 to 10 mA
1 ms max.
Output LED
Output LED
0 VDC
OUT
24 VDC
OUT
OUT
COM (--)
OUT
COM (+)