BDE0900G-TR Rohm Semiconductor, BDE0900G-TR Datasheet - Page 7

• Manufacturer Part Number: BDE0900G-TR
• Description: IC TEMP SENSOR THERM 90C 5-SSOP
• Manufacturer: Rohm Semiconductor

Specifications of BDE0900G-TR

• Sensing Temperature: 90°C Trip Point
• Output Type: Active Low/Open Drain
• Voltage - Supply: 2.5 V ~ 5.5 V
• Accuracy: ±3.5°C
• Package / Case: 6-LSOP (0.063", 1.6mm Width) 5 Leads
• Full Temp Accuracy: +/- 5 C
• Maximum Operating Temperature: + 130 C
• Minimum Operating Temperature: - 30 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

●Notes for use
© 2010 ROHM Co., Ltd. All rights reserved.
BDE□□□0G Series
www.rohm.com
1) Absolute Maximum Ratings
2) GND voltage
3) Pin short and mistake fitting
4) Operation in strong electric field
5) Mutual impedance
An excess in the absolute maximum ratings, such as supply voltage, temperature range of operating conditions, etc.,
can break down devices, thus making impossible to identify breaking mode such as a short circuit or an open circuit.
If any special mode exceeding the absolute maximum ratings is assumed, consideration should be given to take physical
safety measures including the use of fuses, etc.
Make setting of the potential of the GND terminal so that it will be maintained at the minimum in any operating state.
When mounting the IC on the PCB, pay attention to the orientation of the IC. If there is a placement mistake, the IC may be
burned up.
Be noted that using ICs in the strong electric field can malfunction them.
Use short and wide wiring tracks for the power supply and ground to keep the mutual impedance as small as possible.
Use a capacitor to keep ripple to a minimum.
7/8
Technical Note
2010.11 - Rev.B