120A10 OPTO 22, 120A10 Datasheet - Page 11

• Manufacturer Part Number: 120A10
• Description: SSR, PANEL MOUNT, 140VAC, 280VAC, 10A
• Manufacturer: OPTO 22

Specifications of 120A10

• Control Voltage Range: 85VAC To 280VAC
• Operating Voltage Range: 12VAC To 140VAC
• Load Current: 10A
• Isolation Voltage: 4000Vrms
• Control Voltage Type: AC
• Relay Terminals: Screw
• Brand/series: AC Series
• Control Signal Range: 85 VAC (Pick-Up), 10 VAC (Drop-Out)
• Current, Rating: 10 A
• Current, Surge: 110 Apeak
• Dimensions: 2.25 in. L x 1.75 in. W x 0.93 in. H
• Function: Power
• Mounting Type: PCB
• Relay Type: Solid State
• Standards: UL, CSA, CE
• Termination: Screw
• Voltage, Control: 120 VAC
• Voltage, Drop, On-state: 1.6 V
• Peak Surge Current: 110A
• Rohs Compliant: Yes
• Control Voltage Max: 280V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

DC Switching Series Specifications
Model DC60MP Basic Schematic
© 2006–2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
For more information, see form #859, the Solid-State Relays Data Sheet.
NOTE: When controlling an inductive load, like a solenoid or coil, a commutating diode
must be used. Install the commutating diode across the terminals of the load (not the
SSR terminals). This will protect the SSR from damage caused by voltage spikes when
turning off the load.
*Control Current varies with control voltage. See
Current Calculation” on page 17
Operating Voltage
Range
Forward Voltage Drop
Nominal Currrent Rating 3 amps
Off-State Blocking
Signal Pickup Voltage
Signal Dropout Voltage
Signal Input
Impedeance
1 Second Surge
Operating Temp. Range
Isolation Voltage
Off-State Leakage
Package Type
Turn-on Time
Turn-off Time
Note: *MP series maximum allowed control signal at 24 VDC.
Solid-State Relays
800-321-6786 • 951-695-3000 • FAX [phone] • [e-mail] •
DC60P
or DC60MP
5–60 VDC
1.5 volts
at 3 amps
60 VDC
3 VDC
32 Volts*
allowed
1,000 ohms
5 amps
–40 °C to
100 °C
4,000 V
1 mA
maximum
100 usec
1 VDC
P/MP series
750 usec
for information.
RMS
DC200P or
DC200MP
5–200 VDC 5–60 VDC
1.5 volts
at 1 amp
1 amp
250 VDC
3 VDC
32 Volts*
allowed
1 VDC
1,000 ohms 1,000 ohms 1,000 ohms
2 amps
–40 °C to
100 °C
4,000 V
1 mA
maximum
P/MP series
100 usec
750 usec
“Control
RMS
DC60S-3
1.5 volts
at 3 amps
3 amps
60 VDC
3 VDC
32 Volts
allowed
1 VDC
5 amps
–40 °C to
100 °C
4,000 V
1 mA
maximum
Power
series
100 usec
750 usec
RMS
10 amps
DC60S-5
5–60 VDC
1.5 volts
at 5 amps
5 amps
60 VDC
3 VDC
32 Volts
allowed
1 VDC
–40 °C to
100 °C
4,000 V
1 mA
maximum
Power
series
100 usec
750 usec
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
RMS
800-835-6786 • 951-695-3080 • FAX [phone] • [e-mail]
Thermal Ratings
PAGE
11