RJCSR1A60D50EPNO CARLO GAVAZZI, RJCSR1A60D50EPNO Datasheet - Page 5

• Manufacturer Part Number: RJCSR1A60D50EPNO
• Description: SSR, DIN RAIL MOUNT, 660VAC, 32VDC, 50A
• Manufacturer: CARLO GAVAZZI

Specifications of RJCSR1A60D50EPNO

• Control Voltage Type: DC
• Control Voltage Range: 4VDC To 32VDC
• Operating Voltage Range: 42VAC To 660VAC
• Peak Surge Current: 1.9kA
• Contact Configuration: SPST
• Load Current: 50A

Specifications are subject to change without notice (05.07.2007)
Panel Mounting
RJCS
Example
Let the alarm delay setting be
2s (min). If the full load current
is set at 30A, then there will be
an alarm condition if the cur-
rent is under 26.1A for more
Alarm Operation
22,5 mm
The dimensions shown are valid for nominal ratings.
than 2s. (Any fluctutation in
the load current that is pre-
sent for <2s will not be sig-
nalled – this is intended to
eliminate false alarms due to
Alarm Condition
Reset Condition
Dimensions
short duration under-voltage
conditions on the supply
phase). If the control input
goes off within the 2s, the
alarm timer will not be reset
provided the control input
goes on again within 8s
(4x2s).
All dimensions in mm.
5