SCA610-C28H1A VTI Technologies, SCA610-C28H1A Datasheet - Page 8

• Manufacturer Part Number: SCA610-C28H1A
• Description: ACCELEROMETER SGL 1.7G DIL8 SMD
• Manufacturer: VTI Technologies
• Series: SCA610r

Specifications of SCA610-C28H1A

• Axis: X or Y
• Acceleration Range: ±1.7g
• Sensitivity: 1.2V/g
• Voltage - Supply: 4.75 V ~ 5.25 V
• Output Type: Analog
• Bandwidth: 50±30Hz
• Mounting Type: Surface Mount
• Package / Case: 8-SMD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Interface: -
• Other names: 551-1012-2

5.8 Inspection
VTI Technologies Oy
www.vti.fi
4. Devices require bake, before mounting, if:
5. If baking is required, devices may be baked for 24 hours at 85°C.
Note: Packing materials and procedures according to IPC/JEDEC J-STD-033
Note: Level and body temperature defined by IPC/JEDEC J-STD-020
Optical and visual inspection of solder joints can be done easily, since the solder joints are clearly
seen. A visual inspection of the solder joints with conventional AOI (automatic optical inspection)
system can be used. Also X-ray inspection can be used.
Cross-sectional analysis is also an approved method to inspect how well solder has wetted the
pads of component. Cross-sectional analysis is not used for production inspection, but if required, it
can be used to establish and optimize the component assembly process parameters. Cross-
sectioning is a destructive inspection method. An example of a DIL solder joint cross-section in
presented in Figure 9.
Figure 9: Cross-section of the DIL package lead's solder joint (with eutectic SnPb solder).
a) Humidity Indicator Card is > 10% when read at 23 ± 5 °C
b) 3a or 3b not met.
Note: Also Tape&Reel materials are applicable for baking at 85°C
mag.
x5
mag.
x20
Assembly Instructions for SCA6x0 and SCA10x0 series
mag.
x50
Rev.1.0
TN71
8/12