MHL1ECTTP6N8J KOA Speer Electronics, MHL1ECTTP6N8J Datasheet - Page 5

• Manufacturer Part Number: MHL1ECTTP6N8J
• Description: Common Mode Inductors 6.8nH 5%
• Manufacturer: KOA Speer Electronics

Specifications of MHL1ECTTP6N8J

• Dimensions: 0.5 mm W x 1 mm L x 0.5 mm H
• Product: Inductors
• Inductance: 6.8 nH
• Tolerance: 5 %
• Maximum Dc Current: 100 mAmps
• Maximum Dc Resistance: 0.32 Ohms
• Self Resonant Frequency: 5000 MHz
• Operating Temperature Range: - 55 C to + 125 C
• Termination Style: SMD/SMT
• Package / Case: 0402 (1005 metric)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5. Characteristics (continued)
6. Packaging Specifications
Bolivar Drive
Spec ific ation s given herein m ay be c hang ed at an y tim e w itho ut prior not ice. Plea se co nfirm t echn ic al spec ific ations b efore yo u orde r and/ or us e.
Item
Mechanical Shock
Vibration
Thermal Shock
Load Humidity
Life Test
KOA’s multilayer components are provided on tape-and-reel
for use in pick-and-place machines. The reel size is 7 inch.
P.O. Box 547
Requirement
Appearance: There shall be no physical or
mechanical damage
Impedance: Relative to initial value before test
±10%
Impedance: Relative to initial value ±10%
Appearance: There shall be no physical or
mechanical damage.
Impedance: Relative to initial value ±20%.
DCR: The DCR shall not exceed initial specified
value.
Testing of the parts will be made at 0 hours, 250
hours and 500 hours. Before testing the parts
shall be allowed to cool to room temperature for
24 hours.
Appearance: There shall be no physical or
mechanical damage
Impedance: Relative to initial value ±15%
Measurements shall be taken at 0 hours, 250
hours, 500 hours and 1,000 hours and shall meet
the conditions stated above.
Appearance: There shall be no physical or
mechanical damage
Impedance: Relative to initial value ±15%
Measurements shall be taken at 0 hours, 250
hours, 500 hours and 1,000 hours and shall meet
the conditions stated above.
Bradford, PA 16701
USA
814-362-5536
Conditions
Force: 50G
Time: 11 msec
There shall be 3 shocks in each of 6 directions
(18 shocks total).
Only endurance conditioning by sweeping shall
be made. The entire frequency range from
10-2,000 Hz and return to 10 Hz in 20
minutes (this shall constitute one cycle).
Amplitude: 15G
The test shall have a 15G peak and shall be
applied for a period of 4 hours (12 cycles)
in each of 3 mutually perpendicular directions
(a total of 36 cycles within a total of 12 hours).
Steps 1 thru 5 constitute one complete cycle
and the test shall consist of a total of 500
cycles.
Temperature: 85°C ±2°C
Relative Humidity: 85%
Time: 1,000 hours total
Apply: 100% rated current
Temperature: 85°C ±2°C
Time: 1,000 hours total
Apply: 100% rated current
3-transfer
5-transfer
1-start
2-hold
4-hold
Fax [phone]
Step
Temperature
+105°C ±2°C 30 min ±5 min
-40°C ±2°C
-40°C ±2°C 30 min ±5 min
—
—
www.koaspeer.com
0.5 min max.
0.5 min max.
—
PAGE 5 OF 6
Time
SS-222 R12