142-1000-001 Emerson Network Power, 142-1000-001 Datasheet - Page 253

• Manufacturer Part Number: 142-1000-001
• Description: CONN HERMETIC SEAL .012" PIN SMA
• Manufacturer: Emerson Network Power
• Series: SMAr

Specifications of 142-1000-001

• Accessory Type: Hermetic Seal
• Features: Feed Through
• Product: Connector
• For Use With/related Products: SMA Connectors
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1421000001; J566

TNC Straight Crimp Type Plugs and
Bulkhead Jacks for Flexible Cable
Connectivity Solutions
CP-TNC-89-19-BM
CPMC-TNC-13
CPMC-TNC-16
CPMC-TNC-17
CPMC-TNC-1
CPMC-TNC-2
PART NO.
Proflex RG-450
RG-174, 316
RG-55, 142
CABLE
Tel: [phone]
RG-8X
RG-58
RG-59
.335 (8.51)
.315 (8.00)
.315 (8.00)
.315 (8.00)
.315 (8.00)
.315 (8.00)
“A”
•
STRIP DIMENSIONS
Fax: [phone]
.197 (5.00)
.118 (3.00)
.118 (3.00)
.118 (3.00)
.118 (3.00)
.118 (3.00)
“B”
1. Identify connector parts. (3 piece parts–except bulkheads)
2. Strip cable to dimensions shown. Do not nick braid or center con-
3. Assemble contact onto cable as shown.
4. Flare braid and slide body assembly over contact and under braid.
Assembly Instructions
ductor. Tin center conductor if contact will be solder attached. Do
not tin center conductor if contact is to be crimp attached. A wire
stripper of correct size is recommended for this step. Slide heat
shrink (as applicable) and crimp sleeve onto jacket of cable.
Solder Attachment: Solder contact to center conductor through
hole using a minimum amount of solder for a good joint.
Crimp Attachment (where applicable): Crimp contact to center
conductor using recommended crimp hex.
Then seat body assembly firmly onto contact. The cable may have
to be held in a clamping fixture. Arrange braid uniformly around
crimp stem. Slide crimp sleeve forward and crimp using recom-
mended crimp hex. Slide heat shrink forward and shrink (as
applicable).
.118 (3.00)
.157 (4.00)
.157 (4.00)
.157 (4.00)
.157 (4.00)
.157 (4.00)
“C”
•
www.EmersonNetworkPower.com/connectivity
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
SLEEVE HEX CRIMP HEX
.184 (4.67)
.213 (5.41)
.255 (6.48)
.213 (5.41)
.255 (6.48)
.255 (6.48)
CRIMP
.067 (1.70)
.066 (1.68)
CONTACT
.066 (1.69)
.067 (1.70)
.066 (1.68)
.066 (1.68)
RECOMMENDED
CRIMP TOOL
24-9912P
24-9958P
24-9959P
24-9958P
24-9959P
24-9959P
253