BFC233620105 Vishay, BFC233620105 Datasheet - Page 16

• Manufacturer Part Number: BFC233620105
• Description: Suppression Film Capacitors 1.0UF 275VAC 20%
• Manufacturer: Vishay
• Series: MKP3362X2r

Specifications of BFC233620105

• Voltage Rating: 275 Volts
• Capacitance: 1 uF
• Termination Style: Radial
• Dimensions: 11 mm W x 31 mm L x 21 mm H
• Operating Temperature Range: 0 C to + 100 C
• Product: Metallized Polypropylene Suppression Capacitors
• Tolerance: 20 %
• Lead Spacing: 27.5 mm
• Capacitor Application: Safety / Suppression
• Capacitor Dielectric Type: Polypropylene
• Capacitance Tolerance: ± 20%
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 222233620105

www.vishay.com
16
MKP336 2 X2
Vishay BCcomponents
SUB-CLAUSE NUMBER AND
TEST
SUB-GROUP C4
4.15 Charge and discharge
4.15.1 Initial measurements
4.15.3 Final measurements
SUB-GROUP C5
4.16 Radio frequency
characteristic
SUB-GROUP C6
4.17 Passive flammability
SUB-GROUP C7
4.18 Active flammability
Class B
10 000 cycles
Charged to 435 V
Discharge resistance:
Tangent of loss angle:
For C ≤ 1 µF at 10 kHz
For C > 1 µF at 1 kHz
Tangent of loss angle
Insulation resistance
Resonance frequency
Bore of gas jet: Ø 0.5 mm
Fuel: Butane
Test duration for actual volume V in mm³:
V ≤ 250: 10 s
250 < V ≤ 500: 20 s
500 < V ≤ 1750: 30 s
V > 1750: 60 s
One flame application
20 cycles of 2.5 kV discharges on the test
capacitor connected to U
Capacitance
Capacitance
R
=
---------------------------------------------- -
1.25
For technical questions, contact:
435 V
×
C dU dt
Interference Suppression Film Capacitors
(
DC
CONDITIONS
45.0°
DC
⁄
)
RAC
~ 8 mm
MKP Radial Potted Type
12 mm
[e-mail]
¦ΔC/C¦ ≤ 10 % compared to values measured in
4.15.1.
Increase of tan δ:
≤ 0.008 for: C ≤ 1 µF or
≤ 0.005 for: C > 1 µF
Compared to values measured in 4.15.1.
≥ 50 % of values specified in section “Insulation
Resistance” of this specification
≥ 0.9 times the value as specified in section
“Resonant Frequency” of this specification
After removing test flame from capacitor, the
capacitor must not continue to burn for more than
10 s. No burning particle must drop from the
sample.
The cheese cloth around the capacitors shall not
burn with a flame.
No electrical measurements are required.
PERFORMANCE REQUIREMENTS
Document Number: 28120
Revision: 22-Dec-10