LRIS2K-A1S/1GE STMicroelectronics, LRIS2K-A1S/1GE Datasheet - Page 25

IC MEMORY TAG 64BIT UID ADH ANT

LRIS2K-A1S/1GE

Manufacturer Part Number
LRIS2K-A1S/1GE
Description
IC MEMORY TAG 64BIT UID ADH ANT
Manufacturer
STMicroelectronics
Series
LRIS2Kr
Datasheet

Specifications of LRIS2K-A1S/1GE

Rf Type
Read / Write
Frequency
13.56MHz
Features
ISO15693, ISO18000-3, 2048-bits
Package / Case
76mm x 45mm
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
497-5534-2
LRIS2K
6
6.1
6.2
6.3
Communications signal from LRIS2K to VCD
The LRIS2K has several modes defined for some parameters, owing to which it can operate
in different noise environments and meet different application requirements.
Load modulation
The LRIS2K is capable of communication to the VCD via an inductive coupling area
whereby the carrier is loaded to generate a subcarrier with frequency f
generated by switching a load in the LRIS2K.
The load-modulated amplitude received on the VCD antenna must be of at least 10mV
when measured as described in the test methods defined in International Standard
ISO10373-7.
Subcarrier
The LRIS2K supports the one-subcarrier and two-subcarrier response formats. These
formats are selected by the VCD using the first bit in the protocol header. When one
subcarrier is used, the frequency f
When two subcarriers are used, the frequency f
is 484.28 kHz (f
continuous phase relationship between f
Data rates
The LRIS2K can respond using the low or the high data rate format. The selection of the
data rate is made by the VCD using the second bit in the protocol header. It also supports
the x2 mode available on all the Fast commands.
produced by the LRIS2K using the different response format combinations.
Table 10.
High
Low
Standard commands
Fast commands
Standard commands
Fast commands
Data rate
Response data rates
C
/28). When using the two-subcarrier mode, the LRIS2K generates a
Doc ID 13888 Rev 8
S1
13.24 Kbits/s (f
6.62 Kbits/s (f
26.48 Kbits/s (f
52.97 Kbits/s (f
of the subcarrier load modulation is 423.75 kHz (f
One subcarrier
S1
and f
Communications signal from LRIS2K to VCD
S1
S2
c
c
Table 10
/2048)
c
c
/1024)
is 423.75 kHz (f
.
/512)
/256)
shows the different data rates
C
6.67 Kbits/s (f
26.69 Kbits/s (f
/32), and frequency f
Two subcarriers
not applicable
not applicable
S
. The subcarrier is
c
/2032)
c
/508)
C
/32).
25/98
S2

Related parts for LRIS2K-A1S/1GE