MF3MOD2101DA4/04,1 NXP Semiconductors, MF3MOD2101DA4/04,1 Datasheet - Page 7

• Manufacturer Part Number: MF3MOD2101DA4/04,1
• Description: IC DESFIRE EV1 2K EEPROM PLLMC
• Manufacturer: NXP Semiconductors

Specifications of MF3MOD2101DA4/04,1

• Rf Type: Read / Write
• Frequency: 13.56MHz
• Features: ISO14443A / Mifare
• Package / Case: PLLMC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935286814118

NXP Semiconductors
9. DESFire command set
MF3ICD81_MF3ICD41_MF3ICD21_SDS_N_3
Product short data sheet
9.1 ISO/IEC 14443-3
9.2 ISO/IEC 14443-4
A detailed description of all commands can be found in
Table 4.
Table 5.
Command
REQA
WUPA
ANTICOLLISION / SELECT Cascade Level 1
ANTICOLLISION / SELECT Cascade Level 2
HALT
Command
RATS
PPS
WTX
DESELECT
ISO/IEC 14443-3
ISO/IEC 14443-4
Description
The response to the RATS command identifies the MF3ICD81 type to the
PCD.
The PPS command allows an individual selection of the communication baud
rate between PCD and MF3ICD81. For DESFire it is possible to individually
set the communication baud rate independently for both directions i.e.
DESFire allows a non-symmetrical information interchange speed.
If the MF3ICD81 needs more time than the defined FWT to respond to a PCD
command it will send a request for a waiting time extension.
Using DESELECT command MF3ICD81 can be brought to the HALT-state.
MF3ICD81, MF3ICD41, MF3ICD21
Rev. 3 — 17 February 2009
MIFARE DESFire EV1 contactless multi-application IC
Description
REQA and ATQA are implemented fully
according to ISO/IEC 14443-3.
WAKE-UP is implemented fully according to
ISO/IEC 14443-3.
The ANTICOLLISION and SELECT commands
are implemented fully according to ISO/IEC
14443-3. The response is part 1 of the UID.
The ANTICOLLISION and SELECT commands
are implemented fully according to ISO/IEC
14443-3. The response is part 2 of the UID.
The HALT command brings MF3ICD81 to the
HALT-state.
Ref.
1.
© NXP B.V. 2009. All rights reserved.
7 of 15