ATA555815C-PP Atmel, ATA555815C-PP Datasheet - Page 31

• Manufacturer Part Number: ATA555815C-PP
• Description: IC IDIC PLASSTIC TRANSPONDER
• Manufacturer: Atmel

Specifications of ATA555815C-PP

• Rf Type: Read / Write
• Frequency: 125kHz
• Features: 320 Bits
• Package / Case: Plastic Package - 12mm L x 6mm W x 3mm H
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7.10
7.11
4681E–RFID–11/09
GetID
Get_ID (Partial Tag ID)
Table 7-17.
Table 7-18.
When receiving a general GetID command, all tags in the READY state will enter the anticolli-
sion loop and take part in the deterministic arbitration sequence All activated tags will reply
synchronously with the same anticollision response. This specific anticollision signature consists
of a SOF pattern followed by subsequent dual pattern coded Tag ID bit(s) as illustrated in
3-1 on page 10
Table 7-19.
Table 7-20.
Any anticollision loop starts with the interrogator’s GetID command. All tags in the READY state
with a matching partial Tag ID will reply synchronously with their own personal anticollision
response. This consists of an initial SOF pattern followed by the Tag ID bit(s) in dual pattern
coding which continue until the complete Tag ID has been sent or until the tag is eliminated from
the search.
Table 7-21.
Command
Select = 00 00 00
6 bits
SOF
Start of Frame
3 .. 10-bit period
Command
GetID = 00 00 00
6 bits
SOF
Start of Frame
3 .. 10-bit period
Command
GetID (Tag ID) = 00 00 00
6 bits
Interrogator Command Parameters
Tag Response
Interrogator Command
Tag Response
Interrogator Command Parameters (Even Number of (n) Known Tag ID Bits)
and
Figure 6-3 on page
Parameter
Tag ID [MSB], Tag ID [MSB-1],.......Tag ID[MSB-(n-1)]
<n> bits (MSB first); where n = 2, 4, 6, 8....
Parameter
Tag ID
<Length (Tag ID)> bits (MSB first)
CRC
CRC_u (Tag ID)
16 bits (MSB first)
23.
Subsequent Tag ID Bit(s)
Dual pattern code
<n>
2 bits periods (MSB first)
ATA5558
Figure
31