MFRC52301HN1,151 NXP Semiconductors, MFRC52301HN1,151 Datasheet - Page 18

• Manufacturer Part Number: MFRC52301HN1,151
• Description: IC MIFARE READER 32-HVQFN
• Manufacturer: NXP Semiconductors
• Series: MIFARE®r

Specifications of MFRC52301HN1,151

• Frequency: 13.56MHz
• Package / Case: 32-VQFN Exposed Pad, 32-HVQFN, 32-SQFN, 32-DHVQFN
• Operating Current: 7 mA
• Operating Voltage: 2.5 V to 3.6 V
• Product: RFID Readers
• Wireless Frequency: 13.56 MHz
• Interface Type: RS-232, I2C
• Data Rate: 100 Kbps
• Operating Temperature Range: - 25 C to +85 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Rf Type: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 568-4766; 935282956151; MFRC52301HN1

NXP Semiconductors
MFRC523_34
Product data sheet
PUBLIC
Fig 15. Data transfer on the I
SDA
SCL
repeated START
START or
condition
8.3.4.4 Acknowledge
Sr
or
S
MSB
An acknowledge must be sent at the end of one data byte. The acknowledge-related clock
pulse is generated by the master. The transmitter of data, either master or slave, releases
the SDA line (HIGH) during the acknowledge clock pulse. The receiver pulls down the
SDA line during the acknowledge clock pulse so that it remains stable LOW during the
HIGH period of this clock pulse.
The master can then generate either a STOP (P) condition to stop the transfer or a
repeated START (Sr) condition to start a new transfer.
A master-receiver indicates the end of data to the slave-transmitter by not generating an
acknowledge on the last byte that was clocked out by the slave. The slave-transmitter
releases the data line to allow the master to generate a STOP (P) or repeated START (Sr)
condition.
1
Fig 14. Acknowledge on the I
2
2
by transmitter
C-bus
data output
by receiver
data output
SCL from
master
All information provided in this document is subject to legal disclaimers.
7
condition
Rev. 3.5 — 24 September 2010
START
S
8
acknowledgement
signal from slave
interrupt within slave
byte complete,
ACK
9
115235
2
C-bus
1
clock line held LOW while
interrupts are serviced
1
2
2
3 - 8
not acknowledge
signal from receiver
acknowledgement
acknowledge
ACK
8
9
Contactless reader IC
acknowledgement
MFRC523
clock pulse for
repeated START
© NXP B.V. 2010. All rights reserved.
condition
STOP or
9
Sr
or
P
Sr
P
msc608
mbc602
18 of 97