ADG919BRMZ Analog Devices Inc, ADG919BRMZ Datasheet - Page 14

• Manufacturer Part Number: ADG919BRMZ
• Description: IC SW SPDT 2:1 REFL MUX 8-MSOP
• Manufacturer: Analog Devices Inc

Specifications of ADG919BRMZ

• Rf Type: General Purpose
• Frequency: 0Hz ~ 2GHz
• Features: SPDT
• Package / Case: 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
• Supply Voltage Range: 1.65V To 2.75V
• Operating Temperature Range: -40°C To +85°C
• Digital Ic Case Style: MSOP
• No. Of Pins: 8
• Svhc: No SVHC (18-Jun-2010)
• Operating Temperature Max: 85°C
• Operating: RoHS Compliant
• Analogue Switch Type: SPDT
• Bandwidth: 4GHz
• Rohs Compliant: Yes
• Base Number: 919
• Frequency (max): 2GHz
• Insertion Loss (max): 1.25dB
• Number Of Switches: Single
• Pin Count: 8
• Package Type: MSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ADG918/ADG919
ADG9xx EVALUATION BOARD
The ADG9xx evaluation board allows designers to evaluate the
high performance wideband switches with a minimum of effort.
In addition to the evaluation board, the user requires only a
power supply and a network analyzer. An application note is
available with the evaluation board and gives complete
information about operating the evaluation board.
The RFC port (see Figure 29) is connected through a 50 Ω
transmission line to the top left SMA connector J1. RF1 and
RF2 are connected through 50 Ω transmission lines to the top
two SMA connectors, J2 and J3 respectively. A through trans-
mission line connects J4 and J5 and is used to estimate the loss
of the PCB over the environmental conditions being evaluated.
The board is constructed of a 4-layer, FR4 material with a
Figure 29. ADG9xx Evaluation Board Top View
dielectric constant of 4.3 and an overall thickness of 0.062
inches. Two ground layers with grounded planes provide
ground for the RF transmission lines. The transmission lines
were designed using a coplanar waveguide with ground plane
model using a trace width of 0.052 inches, a clearance to ground
plane of 0.030 inches, a dielectric thickness of 0.029 inches, and
a metal thickness of 0.014 inches.
Rev. C | Page 14 of 16