80180002 Crouzet USA, 80180002 Datasheet - Page 10

• Manufacturer Part Number: 80180002
• Description: BLDC 80 W 24VDC REG
• Manufacturer: Crouzet USA

Specifications of 80180002

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

10
Input logic table
On and Direction inputs:
- Input impedance: 60 Ω
- Logic state 0: < 2V
- Logic state 1: > 4V
The built-in encoder supplies fixed width pulses each time a Hall effect
sensor switches. These pulses can be counted to ascertain the speed
and position of the motor, or filtered to obtain an analogue signal pro-
portional to the speed.
The additional direction of rotation (*) output is used to determine the
direction of count of the pulses.
IMPORTANT: These outputs are NPN or PNP type depending on the
version. Consult the wiring diagrams and the precautions for use of
these outputs in the motor specifications.
Crouzet BRUSHLESS DC motors are designed and manufactured to
be integrated into appliances or machines which meet, for example, the
specifications of the machine standard: EN 60335-1 (IEC 335-1,
“Safety of household and similar electrical appliances”).
The integration of Crouzet DC motors into appliances or machines
should generally take account of the following motor characteristics:
- no earth connection
- “simple isolation” motors
- protection index: IP54
- insulation system class: B (120 °C)
- Vibration: EN 60068.2.6: 5G from 55 Hz to 500 Hz/0.35 mm
- Shock: IEC 60068.2.27: 1/2 sine 50G for 11 ms
European low voltage directive 73/23/EEC of 19/02/73:
Crouzet DC motors and geared motors are outside the scope of this
directive (LVD 73/23/EEC applies to voltages over 75 volts DC).
IMPORTANT
■
To ensure correct operation of Brushless actuators, it is advisable to
take account of all the necessary installation and wiring precautions.
■
The stated nominal operating characteristics correspond to the voltage-
torque-speed characteristics which permit continuous operation, at an
ambient temperature of 40 °C. Above these operating conditions, only
intermittent duty cycles will be possible: without exception, where extre-
me conditions prevail, all checks should be performed by the customer
in the real-life context of the application to ensure safe operation.
->
Direction and on/off controls
Built-in encoder
Safety
peak to peak from 10 Hz to 55 Hz
Product operation:
Product characteristics:
For operation in non-nominal conditions, please consult us
On
0
1
1
1
Direction
X
X
1
0
24V
0V
Speed
X
V
V
0
Braking and stop
Braking and stop
Clockwise direction at speed V
Anti-clockwise direction at speed V
500 µs
Action
■
If these products are being used in very specific operating conditions:
- food and beverage (eg: non-continuous, rectified)
- ambient atmosphere (extreme temperatures and vibrations, significant
relative humidity, explosive or confined atmosphere, etc)
->
etc), please consult us
On request, Crouzet will provide the EMC characteristics of the various
types of product.
European directive 89/336/EEC of 03/05/89, “electromagnetic
compatibility”:
DC motors and geared motors which are components designed for pro-
fessionals to be incorporated in more complex devices, and not for end
users, are excluded from the scope of this directive.
However, conscious of the potential customer difficulties concer-
ning problems connected with electromagnetic compatibility,
Crouzet has designed its products to meet the requirements of the
standards: for example EN 55011 Gr. 1 class B (medical) and also
EN 55022, class B (data processing) in terms of emitted electroma-
gnetic interference, in addition to standards connected with
immunity:
IEC 1000- 4 -2/3/4/5/6/8
■
For EMC conformity:
- The motor should be connected to earth via its front flange.
- The length of the wires is 0.5 m max.
(*)
they are required on 30 watt motors, please consult Crouzet.
■
Emission
• Conducted emissions:
• Radiated emissions:
Immunity
• Electrostatic discharges:
• Electromagnetic fields:
• Pulse trains:
• Shock waves:
• Radio frequency:
• Magnetic field:
• Voltage dips:
(*) Note: Functions marked with an asterisk are only available on the 80 watt
versions. If they are required on 30 watt motors, please consult Crouzet.
EMC compatibility
Wiring precautions
Product usage:
Electromagnetic compatibility:
other (use as load, sudden stalling, severe operating cycle,
Note: Functions marked with an asterisk are only available on the 80 watt versions. If
EN 61000-4-29
EN 55022/11G1 class B
EN 55022/11G1 class B
EN 61000-4-2 Level 3
EN 61000-4-3 level 3
EN 61000-4-4 level 3
EN 61000-4-5 level 2
EN 61000-4-6 level 3
EN 61000-4-8 level 4