CSS-H5B43 CUI Inc, CSS-H5B43 Datasheet - Page 3

• Manufacturer Part Number: CSS-H5B43
• Description: BUZZER MAG 14X11X3MM 4-6VO-P SMD
• Manufacturer: CUI Inc
• Series: CSSr
• Type: Magnetic Transducer, External Driver

Specifications of CSS-H5B43

• Frequency: 2.73kHz
• Voltage - Rated: 5Vo-p
• Current Rating: 60mA
• Size / Dimension: Rectangular - 14mm L x 11mm W x 3mm H
• Mounting Type: Surface Mount
• Sound Pressure Level: 91dB
• Operating Mode: Continuous
• Voltage Range: 4 ~ 6Vo-p
• Termination: Solder Pads
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Capacitance @ Frequency: -
• Other names: 102-2195-2

PART NUMBER:
MECHANICAL CHARACTERISTICS
item
soldering
soldering heat resistance
terminal mechanical strength
vibration test
drop test
ENVIRONMENT TEST
item
high temperature test
low temperature test
thermal shock test
temperature cycle test
20050 SW 112
CSS-H5B43
th
Ave. Tualatin, Oregon 97062
test condition
After being placed in a chamber at +80°C for 96 hours.
After being placed in a chamber at -30°C for 96 hours.
The part will be subjected to 10 cycles. One cycle will consist of:
The part will be subjected to 10 cycles. One cycle will consist of:
test condition
Lead terminals are immersed in a solder bath of +270 ±5°C for
3 ±1 seconds.
The buzzer will follow the reflow temperature curve to test its
reflow thermo stability.
For 10 seconds, the force of 9.8 N (1.0 kg) is applied from behind
the part which will be soldered onto the PC Board.
The buzzer should be measured after a vibration amplitude of 1.5
mm with 10 ~ 55 Hz band of vibration frequency to each of the
3 perpendicular directions for 2 hours.
The buzzer without packaging is subjected to 3 drops on each
axis from the height of 75 cm onto a 40 mm thick wooden board.
+25°C
+80°C
30 min.
-30°C
3hrs
a
DESCRIPTION:
12±0.5hrs
60 min.
b
24hours
30 min.
phone [phone]
+80°C
3hrs
c
MAGNETIC BUZZER
a,b : 90~98%RH
c : 80~98%RH
fax [phone] www.cui.com
evaluation standard
95% of the lead pads will be wet with
solder.
No interference in operation.
No damage or cutting off
After any tests, the buzzer will meet
specifications without any damage
in appearance and the SPL should be
within ±10 dBA of the initial
measurements.
evaluation standard
After any tests, the buzzer will meet
specifications without any damage in
appearance except SPL. After
4 hours at 25°C, SPL should be within
±10 dBA of the initial measurements.
date
page
06/2010
3 of 5