SAF-TC1164-128F80HL AB Infineon Technologies, SAF-TC1164-128F80HL AB Datasheet - Page 118

• Manufacturer Part Number: SAF-TC1164-128F80HL AB
• Description: IC MCU 32BIT FLASH LQFP176-2
• Manufacturer: Infineon Technologies
• Series: TC116xr

Specifications of SAF-TC1164-128F80HL AB

• Core Processor: TriCore
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: ASC, CAN, MLI, MSC, SSC
• Peripherals: DMA, POR, WDT
• Number Of I /o: 81
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Ram Size: 76K x 8
• Voltage - Supply (vcc/vdd): 1.42 V ~ 1.58 V
• Data Converters: A/D 36x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 176-LFQFP
• Packages: PG-LQFP-176
• Max Clock Frequency: 80.0 MHz
• Sram (incl. Cache): 76.0 KByte
• Can Nodes: 2
• A / D Input Lines (incl. Fadc): 36
• Program Memory: 1.0 MB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Preliminary
4) Applicable for input pins TESTMODE, TRST, BRKIN, and TXD1A with noise suppression filter of PORST
5) The setup/hold values are applicable for Port 0 and Port 4 input pins with noise suppression filter of HDRST
6) Not subject to production test, verified by design / characterization.
7) This parameter includes the delay of the analog spike filter in the PORST pad.
8) Not subject to production test, verified by design / characterization.
9) In case of power loss during internal flash write, prevents Flash write to random address.
10) Booting from Flash, the duration of the boot-time is defined between the rising edge of the PORST and the
11) Booting from Flash, the duration of the boot time is defined between the following events:
Figure 4-11 Power, Pad and Reset Timing
Data Sheet
PORST
Pads
HDRST
VDDP
OSC
VDD
switched-on (BYPASS = 0).
switched-on (BYPASS = 0), independently whether HDRST is used as input or output.
moment when the first user instruction has entered the CPU and its processing starts.
1. Hardware reset: the falling edge of a short HDRST pulse and the moment when the first user instruction has
entered the CPU and its processing starts, if the HDRST pulse is shorter than 1024 ×
If the HDRST pulse is longer than 1024 ×
boot time (HDRST falling edge to first user instruction).
2. Software reset: the moment of starting the software reset and the moment when the first user instruction
has entered the CPU and its processing starts
V
DDPPA
undefined
state
Pad-
t
oscs
t
POA
t
POA
2)
t
1) as programmed
hd
2) Tri-state, pull device active
T
SYS
, only the time beyond the 1024 ×
1)
114
t
pi
t
hd
2)
1)
Electrical Parameters
T
SYS
TC1163/TC1164
should be added to the
T
reset_beh
SYS
V
DDPR
2)
.
undefined
V1.0, 2008-04
state
Pad-
V
DDPPA