DS5000-32-16+ Maxim Integrated Products, DS5000-32-16+ Datasheet - Page 5

• Manufacturer Part Number: DS5000-32-16+
• Description: IC MPU 32KB 16MHZ 40-DIP
• Manufacturer: Maxim Integrated Products
• Series: DS500xr

Specifications of DS5000-32-16+

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: SIO, UART/USART
• Peripherals: Power-Fail Reset, WDT
• Number Of I /o: 32
• Program Memory Type: SRAM
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 4.75 V ~ 5.25 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 40-DIP Module (600 mil), 40-EDIP
• Processor Series: DS500x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 32 KB
• Interface Type: UART
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 3
• Operating Supply Voltage: 12.5 V to 13 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: DS5000TK
• Minimum Operating Temperature: 0 C
• Controller Family/series: (8051) 8052
• No. Of I/o's: 32
• Program Memory Size: 64 KB
• Ram Memory Size: 32KB
• Cpu Speed: 16MHz
• Embedded Interface Type: UART
• Digital Ic Case Style: DIP
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

DS5000(T) LOGICAL ADDRESS SPACES Figure 2
PROGRAM LOADING
The Program Load Modes allow initialization of the NV RAM Program/Data Memory. This initialization
may be performed in one of two ways:
1. Serial Program Loading that can perform Bootstrap Loading of the DS5000(T). This feature allows
2. Parallel Program Load cycles that perform the initial loading from parallel address/data information
The DS5000(T) is placed in its Program Load configuration by simultaneously applying a logic 1 to the
RST pin and forcing the
will look for a parallel Program Load pulse, or a serial ASCII carriage return (0DH) character received at
9600, 2400, 1200, or 300 bps over the serial port.
The hardware configurations used to select these modes of operation are illustrated in Figure 3.
the loading of the application program to be delayed until the DS5000(T) is installed in the end
system. Dallas Semiconductor strongly recommends the use of serial program loading because of its
versatility and ease of use.
presented on the I/O port pins. This mode is timing-set compatible with the 8751H microcontroller
programming mode.
PSEN
line to a logic 0 level. Immediately following this action, the DS5000(T)
5 of 19