PIC16F873A-I/SP Microchip Technology, PIC16F873A-I/SP Datasheet - Page 298

• Manufacturer Part Number: PIC16F873A-I/SP
• Description: IC MCU FLASH 4KX14 EE 28DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F873A-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 7KB (4K x 14)
• Package / Case: 28-DIP (0.300", 7.62mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Eeprom Size: 128 x 8
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 192 B
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 22
• Number Of Timers: 3
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DM163022, DV164120
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 5 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: PIC16F873AI/SP

PICmicro MID-RANGE MCU FAMILY
17.4.1.2
DS31017A-page 17-22
Slave Reception
When the R/W bit of the address byte is clear and an address match occurs, the R/W bit of the
SSPSTAT register is cleared. The received address is loaded into the SSPBUF register.
When the address byte overflow condition exists, then no acknowledge (ACK) pulse is given. An
overflow condition is defined as either the BF bit (SSPSTAT<0>) is set or the SSPOV bit
(SSPCON1<6>) is set.
An SSP interrupt is generated for each data transfer byte. The SSPIF flag bit must be cleared in
software. The SSPSTAT register is used to determine the status of the received byte.
Note:
The SSPBUF will be loaded if the SSPOV bit is set and the BF flag bit is cleared. If
a read of the SSPBUF was performed, but the user did not clear the state of the
SSPOV bit before the next receive occurred. The ACK is not sent and the SSPBUF
is updated.
Preliminary
1997 Microchip Technology Inc.