PIC16C716-20/SO Microchip Technology, PIC16C716-20/SO Datasheet - Page 46

• Manufacturer Part Number: PIC16C716-20/SO
• Description: IC MCU OTP 2KX14 A/D PWM 18SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C716-20/SO

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 13
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 18-SOIC (7.5mm Width)
• Processor Series: PIC16C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 13
• Number Of Timers: 3 bit
• Operating Supply Voltage: 2.5 V to 5.5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: 0 C
• On-chip Adc: 4 bit
• For Use With: XLT18SO-1 - SOCKET TRANSITION 18SOIC 300MILISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMING309-1011 - ADAPTER 18-SOIC TO 18-DIP309-1010 - ADAPTER 18-SOIC TO 18-DIPAC164010 - MODULE SKT PROMATEII DIP/SOIC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

PIC16C712/716
7.4
When the CCP module is disabled, PORTB<3>
operates as a normal I/O pin. When the CCP module
is
Multiplexing details of the CCP1 module are shown on
PORTB<3>, refer to Figure 3.6.
Table 7-5 below shows the effects of the CCP module
operation on PORTB<3>
TABLE 7-5:
DS41106B-page 44
Off
Capture
Compare
PWM
Module
CCP1
Mode
enabled,
CCP1 Module and PORTB
Operation
CCP1CON = --xx 0000 Off
CCP1CON = --xx 01xx
TRISCCP = ---- -1-x
CCP1CON = --xx 01xx
TRISCCP = ---- -0-x
CCP1CON = --xx 10xx
TRISCCP = ---- -0-x
CCP1CON = --xx 11xx
TRISCCP = ---- -0-x
PORTB<3>
CCP1 MODULE AND PORTB OPERATION
Control Bits
operation
The CCP1 module will capture an event
on the RB3/CCP1 pin which is driven by
an external circuit. The DCCP bit can
read the signal on the RB3/CCP1 pin.
The CCP1 module will capture an event
on the RB3/CCP1 pin which is driven by
the DCCP bit. The DCCP bit can read
the signal on the RB3/CCP1 pin.
The CCP1 module produces an output
on the RB3/CCP1 pin when a compare
event occurs. The DCCP bit can read
the signal on the RB3/CCP1 pin.
The CCP1 module produces the PWM
signal on the RB3/CCP1 pin. The
DCCP bit can read the signal on the
RB3/CCP1 pin.
is
CCP1 Module Operation
affected.
.
PORTB<3> functions as normal I/O.
PORTB<3> always reads ‘0’ when
configured as input. If PORTB<3> is
configured as output, reading
PORTB<3> will read the data latch.
Writing to PORTB<3> will always
store the result in the data latch, but it
does not drive the RB3/CCP1 pin.
PORTB<3> Operation
© 2005 Microchip Technology Inc.