B82464A4102M EPCOS Inc, B82464A4102M Datasheet - Page 13

• Manufacturer Part Number: B82464A4102M
• Description: INDUCTOR POWER 1.0UH 7.0A SMD
• Manufacturer: EPCOS Inc
• Series: B82464A4r
• Type: Ferrite Corer

Specifications of B82464A4102M

• Inductance: 1µH
• Current: 7A
• Current - Saturation: 11A
• Tolerance: ±20%
• Dc Resistance (dcr): 9 mOhm Max
• Self Resonant Freq: 120MHz
• Package / Case: 0.409" L x 0.409" W x 0.189" H (10.40mm x 10.40mm x 4.80mm)
• Mounting Type: Surface Mount
• Frequency - Test: 100kHz
• Material - Core: Ferrite
• Applications: General Purpose
• Inductance Tolerance: ± 20%
• Dc Resistance Max: 9000µohm
• Dc Current Rating: 7A
• Resonant Frequency: 120MHz
• Core Material: Ferrite
• Inductor Case Style: SMD
• No. Of Pins: 2
• Svhc: No SVHC
• Dc Current Max: 7A
• Rohs Compliant: Yes
• Maximum Dc Current: 7 Amps
• Maximum Dc Resistance: 0.009 Ohms
• Termination Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Shielding: -
• Q @ Freq: -
• Current - Temperature Rise: -
• Lead Free Status / Rohs Status: Details
• Other names: 495-2001-2; B82464A4102M000

When using off-the-shelf filters, observe the following rules:
5
All products by EPCOS AG are basically designed to conform to the German VDE regulations
and/or EN standards. The respective regulations or standards are given for each component type.
Many of our components have also been approval-tested in accordance with national and interna-
tional regulations. The approval marks and quality assurance marks are listed in the data sheets.
Examples of approval marks:
Example of a quality assurance mark:
In future, chokes will be tested in accordance with the new European standard EN 138 100. A uni-
form European mark of conformity has not yet been defined. For the time being the national marks
of conformity are used (e.g. VDE) and the corresponding European standards is stated beside the
mark.
6
When selecting EMC components – in particular in case of power line applications – the safety reg-
ulations applicable to the relevant equipment must be observed.
Germany
General Technical Information
VDE
Ensure a proper electrically conductive connection between the filter case and/or filter ground
and the metallic case of the interference source or disturbed equipment, and
provide sufficient RF decoupling between the lines at the filter input (line causing the interfer-
ence) and the filter output (filtered line), if necessary by using shielding partitions.
Approvals
Safety regulations
CECC quality assurance mark
USA
UL
21
04/00