101-0954 Rabbit Semiconductor, 101-0954 Datasheet - Page 28

• Manufacturer Part Number: 101-0954
• Description: KIT DEV RABBIT RCM3360/3370 INTL
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r

Specifications of 101-0954

• For Use With/related Products: RCM3360
• Lead Free Status / RoHS Status: Vendor undefined / Vendor undefined

4.1 RCM3360/RCM3370 Digital Inputs and Outputs
Figure 5 shows the RCM3360/RCM3370 pinouts for headers J3 and J4.
Figure 5. RCM3360/RCM3370 Pinouts
The pinouts for the RCM3000, RCM3100, RCM3200, RCM3300/RCM3310, RCM3305/
RCM3315, RCM3360/RCM3370, and RCM3365/RCM3375 are almost compatible, except
signals PB0, PC4, and PC5. PB0, PC4, and PC5 are used for the SPI interface to the serial flash on
the RCM3300/RCM3310 and the RCM3305/RCM3315, but are available on the RCM3360/
RCM3370 and the RCM3365/RCM3375. Visit the
Web site
for further information.
standard 2 × 34 headers with a nominal 2 mm pitch. An RJ-45 Ether-
Headers J3 and J4 are
net port is also included with the RCM3360/RCM3370.
Pins 29–32 on header J3 are configured using 0 Ω resistors at locations JP4, JP5, JP7, and
JP8 to be PD3, PD2, PD7, and PD6 respectively. They may also be reconfigured to carry
the Ethernet signals TPO+, TPO–, TPI+, and TPI–.
Pins 33 and 34 on header J3 are wired to carry the
LINK
and
ACT
signals that illuminated
the corresponding LEDs on the RCM3360/RCM3370 module. These signals may be “dis-
connected” by removing 0 Ω surface-mount resistors R41 and R42.
See Appendix A.5 for more information about the locations of these surface-mount
resistors.
22
RabbitCore RCM3360/RCM3370