Z8F08200100KIT Zilog, Z8F08200100KIT Datasheet - Page 91

• Manufacturer Part Number: Z8F08200100KIT
• Description: DEV KIT FOR Z8 ENCORE 4K TO 8K
• Manufacturer: Zilog
• Series: Z8 Encore!®r
• Type: MCUr

Specifications of Z8F08200100KIT

• Contents: Evaluation Board, Cable, Power Supply, Software and Documentation
• Data Bus Width: 8 bit
• Interface Type: RS-485
• Silicon Manufacturer: Zilog
• Core Architecture: Z8 Encore
• Silicon Core Number: Z8F0822SJ020
• Silicon Family Name: XP F0822
• For Use With/related Products: Z8 Encore!™
• For Use With: 269-4661 - KIT ACC ETHERNET SMART CABLE
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3183

Table 39. Timer 0–1 High Byte Register (TxH)
Table 40. Timer 0–1 Low Byte Register (TxL)
Timer Control Register Definitions
PS022517-0508
BITS
FIELD
RESET
R/W
ADDR
BITS
FIELD
RESET
R/W
ADDR
Timer Output Signal Operation
Timer 0–1 High and Low Byte Registers
7
7
Register is read, the contents of the Timer Low Byte Register are placed in a holding
register. A subsequent read from the Timer Low Byte Register returns the value in the
holding register. This operation allows accurate reads of the full 16-bit timer count value
while enabled. When the timers are not enabled, a read from the Timer Low Byte Register
returns the actual value in the counter.
Timer Output is a GPIO port pin alternate function. Generally, the Timer Output is toggled
every time the counter is reloaded.
The Timer 0–1 High and Low Byte (TxH and TxL) Registers
current 16-bit timer count value. When the timer is enabled, a read from TxH causes the
value in TxL to be stored in a temporary holding register. A read from TMRL always
returns this temporary register when the timers are enabled. When the timer is disabled,
reads from the TMRL reads the register directly.
Writing to the Timer High and Low Byte Registers while the timer is enabled is not
recommended. There are no temporary holding registers available for write operations,
so simultaneous 16-bit writes are not possible. If either the Timer High or Low Byte
Registers are written during counting, the 8-bit written value is placed in the counter (High
or Low Byte) at the next clock edge. The counter continues counting from the new value.
6
6
5
5
4
4
0
F00H, F08H
F01H, F09H
R/W
R/W
TH
TL
0
3
3
2
2
Z8 Encore! XP
(Table
Product Specification
1
1
39) contain the
®
F0822 Series
0
0
1
Timers
78