Z8F08200100KIT Zilog, Z8F08200100KIT Datasheet - Page 193

• Manufacturer Part Number: Z8F08200100KIT
• Description: DEV KIT FOR Z8 ENCORE 4K TO 8K
• Manufacturer: Zilog
• Series: Z8 Encore!®r
• Type: MCUr

Specifications of Z8F08200100KIT

• Contents: Evaluation Board, Cable, Power Supply, Software and Documentation
• Data Bus Width: 8 bit
• Interface Type: RS-485
• Silicon Manufacturer: Zilog
• Core Architecture: Z8 Encore
• Silicon Core Number: Z8F0822SJ020
• Silicon Family Name: XP F0822
• For Use With/related Products: Z8 Encore!™
• For Use With: 269-4661 - KIT ACC ETHERNET SMART CABLE
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3183

PS022517-0508
•
•
•
•
Write Program Memory (0AH)
to Program Memory. This command is equivalent to the LDC and LDCI instructions.
Data can be written 1-65536 bytes at a time (65536 bytes can be written by setting size
to zero). The on-chip Flash Controller must be written to and unlocked for the
programming operation to occur. If the Flash Controller is not unlocked, the data is
discarded. If the device is not in DEBUG mode or if the Read Protect Option Bit is
enabled, the data is discarded.
Read Program Memory (0BH)
from Program Memory. This command is equivalent to the LDC and LDCI
instructions. Data can be read 1-65536 bytes at a time (65536 bytes can be read by
setting size to zero). If the device is not in DEBUG mode or if the Read Protect Option
Bit is enabled, this command returns
(Flash version only) Write Data Memory (0CH)
command writes data to Data Memory. This command is equivalent to the LDE and
LDEI instructions. Data can be written 1-65536 bytes at a time (65536 bytes can be
written by setting size to 0). If the device is not in DEBUG mode or if the Read
Protect Option Bit is enabled, the data is discarded.
Read Data Memory (0DH)
Memory. This command is equivalent to the LDE and LDEI instructions. Data can be
read 1-65536 bytes at a time (65536 bytes can be read by setting size to 0). If the
device is not in DEBUG mode, this command returns
DBG ← 0AH
DBG ← Program Memory Address[15:8]
DBG ← Program Memory Address[7:0]
DBG ← Size[15:8]
DBG ← Size[7:0]
DBG ← 1-65536 data bytes
DBG ← 0BH
DBG ← Program Memory Address[15:8]
DBG ← Program Memory Address[7:0]
DBG ← Size[15:8]
DBG ← Size[7:0]
DBG → 1-65536 data bytes
DBG ← 0CH
DBG ← Data Memory Address[15:8]
DBG ← Data Memory Address[7:0]
DBG ← Size[15:8]
DBG ← Size[7:0]
DBG ← 1-65536 data bytes
DBG ← 0DH
DBG ← Data Memory Address[15:8]
DBG ← Data Memory Address[7:0]
DBG ← Size[15:8]
—The Read Data Memory command reads from Data
—The Read Program Memory command reads data
—The Write Program Memory command writes data
FFH
for the data.
—The Write Data Memory
Z8 Encore! XP
FFH
for the data.
Product Specification
®
On-Chip Debugger
F0822 Series
180