HFBR-57E0PZ Avago Technologies US Inc., HFBR-57E0PZ Datasheet - Page 3

• Manufacturer Part Number: HFBR-57E0PZ
• Description: TXRX MM SFP LC CONN BAIL DELATCH
• Manufacturer: Avago Technologies US Inc.
• Series: -r

Specifications of HFBR-57E0PZ

• Applications: Ethernet
• Mounting Type: SFP
• Voltage - Supply: 2.97 V ~ 3.63 V
• Connector Type: LC Duplex
• Wavelength: 1300nm
• Data Rate: 155MBd
• Supply Voltage: 3.3V
• Wavelength Typ: 1300nm
• Leaded Process Compatible: Yes
• Optical Fiber Type: TX/RX
• Optical Rise Time: 3/2.2ns
• Optical Fall Time: 3/2.2ns
• Jitter: 0.1/0.14ns
• Operating Temperature Classification: Commercial
• Peak Wavelength: 1308/1380nm
• Package Type: SFP
• Operating Supply Voltage (min): 2.97V
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.63V
• Output Current: 50mA
• Operating Temp Range: 0C to 70C
• Mounting: Snap Fit To Panel
• Pin Count: 20
• Product: Transceiver
• Maximum Rise Time: 3 ns, 2.2 ns
• Maximum Fall Time: 3 ns, 2.2 ns
• Pulse Width Distortion: 0.1 ns, 0.14 ns
• Maximum Output Current: 50 mA
• Operating Supply Voltage: 2.97 V to 3.63 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Package / Case: SFP-20
• Function: SFF Pluggable Transceivers with LC connector for ATM, FDDI, Fast Ethernet and SONET OC-3/SDH STM-1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: Multimode Glass
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Serial Identification (EEPROM)
The HFBR-57E0 complies with the industry standard
MSA that defines the serial identification protocol. This
protocol uses the 2-wire serial CMOS E2PROM protocol
of the ATMEL AT24C01A or equivalent. The contents of
the HFBR-57E0 serial ID memory are defined in Table 3 as
specified in the SFP MSA.
Functional Data I/O
The HFBR-57E0 fiberoptic transceiver is designed to ac-
cept industry standard differential signals. In order to re-
duce the number of passive components required on the
customer’s board, Avago has included the functionality
of the transmitter bias resistors and coupling capacitors
within the fiberoptic module. The transceiver is compat-
ible with an “ac-coupled” configuration and is internally
terminated. Figure 5 depicts the functional diagram of
the HFBR-57E0.
Regulatory Compliance
See Table 1 for transceiver Regulatory Compliance perfor-
mance. The overall equipment design will determine the
certification level. The transceiver performance is offered
as a figure of merit to assist the designer.
Table 1. Regulatory Compliance
3
Feature
Electrostatic Discharge (ESD)
to the Electrical Pins
Electrostatic Discharge (ESD)
to the Duplex LC Receptacle
Electromagnetic Interference
(EMI)
Immunity
Eye Safety
Component Recognition
RoHS Compliance
Test Method
MIL-STD-883C
Variation of IEC 61000-4-2
FCC Class B
CENELEC CEN55022
Class B (CISPR 21)
VCCI Class 1
Variation of IEC 61000-4-3
AEL Class 1
EN60825-1 (+A11)
Underwriters Laboratories and Ca-
nadian Standard Associations Joint
Component Recognition for Informa-
tion Technology Equipment Including
Electrical Business Equipment
Electrostatic Discharge (ESD)
There are two conditions in which immunity to ESD
damage is important. Table 1 documents our immunity
to both of these conditions. The first condition is during
handling of the transceiver prior to insertion into the
transceiver port. To protect the transceiver, it is important
to use normal ESD handling precautions.
These precautions include using grounded wrist straps,
workbenches, and floor mats in ESD controlled areas.
The ESD sensitivity of the HFBR-57E0 is compatible with
typical industry production environments. The second
condition is static discharges to the exterior of the host
equipment chassis after installation. To the extent that the
duplex LC optical interface is exposed to the outside of
the host equipment chassis, it may be subject to system-
level ESD requirements. The ESD performance of the
HFBR-57E0 exceeds typical industry standards.
Immunity
Equipment hosting the HFBR-57E0 modules will be sub-
jected to radio-frequency electro magnetic fields in some
environments. These transceivers have good immunity to
such fields due to their shielded design.
Typically withstand at least 25 kV without damage
Performance
Meets Class 2 (2000 to 3999 Volts).Withstand up to
2200 V applied between electrical pins.
when the LC connector receptacle is contacted by
a Human Body Model probe.
System margins are dependent on customer
board and chassis design.
Typically shows a negligible effect from a 10 V/m
field swept from 80 to 450 MHz applied to the
transceiver without a chassis enclosure.
Compliant per Avago testing under single fault
conditions.
TUV Certification: R 72042022
UL File#: E173874
Reference to EU RoHS Directive 2002/95/EC