2811271 Phoenix Contact, 2811271 Datasheet

PROGRAMING ADAPTER USB INTERFACE

2811271

Manufacturer Part Number
2811271
Description
PROGRAMING ADAPTER USB INTERFACE
Manufacturer
Phoenix Contact
Datasheet

Specifications of 2811271

Accessory Type
IFS-USB-Programming Adapter
For Use With/related Products
UPS Systems
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
IFS-USB-PROG-ADAPTER
TRIO-UPS/1AC/24DC/5
Uninterruptible power supply with integrated power
supply unit
INTERFACE
Data sheet
104103_en_00
1
The TRIO-UPS/1AC/24DC/5 provides an uninterruptible
24 V DC voltage at a maximum load current of up to 5 A in
both an error-free AC power supply network and in the event
of power failure.
It is designed specifically for supplying industrial PCs (IPC).
The power supply unit and the electronic switch-over unit are
housed in the same housing.
In the event of supply voltage failure, buffer mode is
activated without interruption. In this operating mode, the
output voltage is directly dependent on the battery voltage.
In the event of a voltage dip, the IPC continues operating
without interruption, thus increasing system availability.
Uncontrolled shutdown is avoided.
The TRIO-UPS/1AC/24DC/5 can be parameterized using a
service PC and the UPS-CONF configuration and
management software via an IFS-USB-PROG-ADAPTER.
For convenient parameter transfer between various TRIO-
UPS devices, the IFS-CONFSTICK configuration stick is
available as an option.
Description
DANGER
Never carry out work when voltage is present.
The device contains dangerous live elements and high levels of stored energy.
Depending on the ambient temperature and load, the housing can become very hot.
Make sure you always use the latest documentation.
It can be downloaded at www.phoenixcontact.net/download.
This data sheet is valid for all products listed under "Ordering data" on page 3.
© PHOENIX CONTACT - 2009-09-01
Features
Space-saving
The TRIO-UPS combines a power supply unit and
electronic switch-over unit in the same housing
Flexible
Rechargeable battery module with 1.3, 3.4, 7.2 or 12 Ah
Autonomous
In the event of AC mains failure, the industrial PC
continues operating without interruption
Time-saving
When the supply voltage is reapplied, the industrial PC
starts automatically
Parameterizable
Can be parameterized with the PC or configuration stick

Related parts for 2811271

2811271 Summary of contents

Page 1

... Depending on the ambient temperature and load, the housing can become very hot. Make sure you always use the latest documentation. It can be downloaded at www.phoenixcontact.net/download. This data sheet is valid for all products listed under "Ordering data" on page 3. © PHOENIX CONTACT - 2009-09-01 Features – Space-saving ...

Page 2

... Rechargeable battery module.................................................................................................... 9 Method of operation................................................................................................................... 9.1 Output voltage .............................................................................................................................................. 13 9.2 Remote shutdown ........................................................................................................................................ 13 9.3 Buffer time setting ........................................................................................................................................ 13 9.4 PC mode ...................................................................................................................................................... 13 9.5 PC idle time .................................................................................................................................................. 14 9.6 Battery management .................................................................................................................................... 15 10 Interfaces................................................................................................................................... 10.1 Config.-Port .................................................................................................................................................. 15 10.2 IFS-USB-PROG-ADAPTER ......................................................................................................................... 15 10.3 IFS-CONFSTICK.......................................................................................................................................... 15 11 UPS-CONF configuration and management software ............................................................... 104103_en_00 TRIO-UPS/1AC/24DC PHOENIX CONTACT ...

Page 3

... Type Order No. MINI-BAT/24DC/1.3AH 2866417 QUINT-BAT/24DC/3.4AH 2866349 QUINT-BAT/24DC/7.2AH 2866352 QUINT-BAT/24DC/12AH 2866365 UPS-CONF 2320403 IFS-USB-PROG-ADAPTER 2811271 IFS-CONFSTICK 2986122 100 ... 240 ... 264 V AC (< derating: 2.5%/V) 100 ... 350 V DC (UL508: 100 ... 250 V) 45 ... 65 Hz 0.95 A/1.1 A 1.7 A/1.8 A typical < < 1.3 A²s 150 ms 200 ms Varistor T 6 ...

Page 4

... Can be adjusted via UPS-CONF software 104103_en_00 22.5 ... 29 2.5%/ approximately Yes, unlimited < 1% (static load change 10 ... 90%) 88% 86 27.9 ... 19 0 2.5%/ approximately Yes, 3300 µF > 10; 15; 20; PC mode Yes Yes I/U 1.0 A/0.2 A/1 mV/K / 200 mV h/4 h/200 h 19 (preset/minimum/maximum) 20 TRIO-UPS/1AC/24DC/5 4 PHOENIX CONTACT ...

Page 5

... Bat.-Charge, Bat.-Mode, Bat.-Mode Delayed, battery almost flat -25°C ... +70°C -40°C ... +80°C 95% 2 3K3 < 15 Hz, amplitude ±2.5 mm according to IEC 60068-2 ... 150 Hz, 2.3g, 90 min. 30g in each direction 500 60715 IP20 I > 500,000 h Aluminum (AlMg3)/zinc-plated sheet steel 130 mm x 118 mm 1.1 kg TRIO-UPS/1AC/24DC/5 5 PHOENIX CONTACT ...

Page 6

... Cable to cable) Output 2 kV (Level 3 - asymmetrical (Level 3 - symmetrical) Signal 2 kV (Level 3 - asymmetrical) Remark Criterion B Input/output/signal Level 3 Frequency range 10 kHz ... 80 MHz Voltage 10 kV Remark Criterion A Radio interference voltage according EN 55011 (EN 55022) Class B, industrial and residential to EN 55011 applications TRIO-UPS/1AC/24DC PHOENIX CONTACT 6 ...

Page 7

... Connection notes NOTE: Electrostatic discharge The device contains components that can be damaged or destroyed by electrostatic discharge. When handling the device, observe the necessary safety precautions against electrostatic discharge (ESD) according to EN 61340-5-1 and EN 61340-5-2. 104103_en_00 TRIO-UPS/1AC/24DC/5 7 PHOENIX CONTACT ...

Page 8

... The following cable cross-sections can be connected: Terminal block No TRIO-UPS/1AC/24DC/5 Connection terminal blocks Rigid Stranded AWG [mm²] [mm²] 0.2 - 2.5 0 0.5 - 0.6 3.5 - 4.5 In order to comply with UL approval, use copper cables that are designed for operating temperatures >75°C. PHOENIX CONTACT Tightening torque [Nm] [lb in] 8 ...

Page 9

... networks according to VDE 0100-300/IEC 60364-3) with nominal voltages of 100 V AC ... 240 V AC. TN Figure 3 TRIO-UPS/1AC/24DC/5 For operation using two phase conductors of a three-phase system, an all-pole disconnecting device must be provided. TN Single-phase network systems PHOENIX CONTACT L PEN + - ...

Page 10

... The UPS has been overloaded in 9 mains mode, the battery is OK and charged The UPS has been overloaded in 10 mains mode, the battery is faulty Key LED OFF LED ON LED flashing TRIO-UPS/1AC/24DC/5 BAT is < 20.4 V) BAT = 19.2 V) and BAT 10 PHOENIX CONTACT ...

Page 11

... DIN rail at a 90° angle. Mount the DIN rail adapter (UTA 107) as shown in the figure. The screws that were previously used to secure the UTA must be used: Torx T10 (0.8 Nm ... 0.9 Nm tightening torque). Figure 8 Modification for flat mounting position B TRIO-UPS/1AC/24DC/5 11 PHOENIX CONTACT ...

Page 12

... They have a service life of six to nine years at an ambient temperature of 20°C. In order to ensure immediate availability, all batteries are supplied fully charged. Startup should be carried out at the latest after nine months at 20°C ... 30°C, or after six months at 30°C ... 40°C. PHOENIX CONTACT 12 ...

Page 13

... In "PC mode", the UPS function follows a chronological sequence that can be parameterized via the software and individually optimized for the relevant IPC solution. Requirements: IFS-USB-PROG-ADAPTER data cable (Order No. 2811271) and UPS-CONF software (Order No. 2320403). 104103_en_00 To set the parameters, an Interface interface (IFS) is used for data exchange between the TRIO-UPS and a suitable user interface on the IPC ...

Page 14

... Active switching output (can be parameterized LED green ON POWER IN OK OFF 9 9 LED yellow ON Bat. mode OFF PC response ON OFF Figure 10 Time diagrams 104103_en_00 Delay time Power comes back on during set time PC shutdown PC shutdown Delay time TRIO-UPS/1AC/24DC/5 PC shutdown PC idle time PHOENIX CONTACT 14 ...

Page 15

... The TRIO-UPS is connected to the USB connection on the service PC via the "Config.-Port" using the IFS-USB-PROG- ADAPTER data cable. 10.2 IFS-USB-PROG-ADAPTER The programming adapter (Order No. 2811271) represents the interface between the service PC and the TRIO-UPS and is required in order to parameterize the TRIO-UPS. Figure 11 Programming adapter 104103_en_00 10 ...

Page 16

... IPC and TRIO-UPS is interrupted, the UPS-CONF dialog box is automatically displayed on screen. The status is queried cyclically. PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany • Phone: + 104103_en_00 PHOENIX CONTACT • P.O.Box 4100 • Harrisburg • PA 17111-0100 • USA • Phone: +717-944-1300 www.phoenixcontact.com ...

Related keywords