M36DR432BD ST Microelectronics, M36DR432BD Datasheet - Page 22

• Manufacturer Part Number: M36DR432BD
• Description: 32 Mbit 2Mb x16 / Dual Bank / Page Flash Memory and 4 Mbit 256Kb x16 SRAM / Multiple Memory Product
• Manufacturer: ST Microelectronics

M36DR432AD, M36DR432BD
Error Bit (DQ5). The Error Bit can be used to
identify if an error occurs during a program or
erase operation.
The Error Bit is set to ‘1’ when a program or erase
operation has failed. When it is set to ‘0’ the pro-
gram or erase operation was successful.
If any Program command is used to try to set a bit
from ‘0’ to ‘1’ Status Register Error bit DQ5 will be
set to ‘1’, only if V
12.6V.
The Error Bit is reset by a Read/Reset command.
Erase Timer Bit (DQ3). The Erase Timer bit is
used to indicate the timeout period for an erase
operation.
When the last block Erase command has been en-
tered to the Command Interface and it is waiting
for the erase operation to start, the Erase Timer Bit
is set to ‘0’. When the erase timeout period is fin-
ished, DQ3 returns to ‘1’, (80µs to 120µs).
22/52
PP
is in the range of 11.4V to
DQ0, DQ1 and DQ4 are reserved for future use
and should be masked.
Table 11. Polling and Toggle Bits
Program
Erase
Erase Suspend Read
(in Erase Suspend
block)
Erase Suspend Read
(outside Erase Suspend
block)
Erase Suspend Program
Mode
DQ7
DQ7
DQ7
DQ7
0
1
Toggle
Toggle
Toggle
DQ6
DQ6
1
Toggle
DQ2
DQ2
N/A
1
1