NXSB064 NICHIA [NICHIA CORPORATION], NXSB064 Datasheet - Page 5
![no-image](/images/no-image-200.jpg)
NXSB064
Manufacturer Part Number
NXSB064
Description
SPECIFICATIONS FOR NICHIA CHIP TYPE BLUE LED
Manufacturer
NICHIA [NICHIA CORPORATION]
Datasheet
1.NXSB064.pdf
(14 pages)
7.CAUTIONS
(2) Storage
(1) Moisture Proof Package
· When moisture is absorbed into the SMT package it may vaporize and expand during soldering.
· The moisture proof package is made of an aluminum moisture proof bag.
· Storage Conditions
· If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage
· This product has silver plated metal parts that are inside and/or outside the package body.
· After assembly and during use, silver plating can be affected by the corrosive gases emitted by
· Please avoid rapid transitions in ambient temperature, especially in high humidity environments where
There is a possibility that this can cause exfoliation of the contacts and damage to the optical
characteristics of the LEDs.
to a minimum in the package.
a moisture absorbent material (silica gel) is inserted into the aluminum moisture proof bag.
The silica gel changes its color from blue to pink as it absorbs moisture.
time, baking treatment should be performed using the following conditions.
plating becomes tarnished when being exposed to an environment which contains corrosive gases.
Any LED with tarnished leads may lead to poor solderability and deterioration of optical characteristics.
Please do not expose the LEDs to corrosive atmosphere during storage.
components and materials in close proximity of the LEDs within an end product, and the gases entering
into the product from the external atmosphere. The above should be taken into consideration when
designing.
such as halogen.
condensation can occur.
Before opening the package :
After opening the package :
The LEDs should be kept at 30°C or less and 90%RH or less. The LEDs should be used within a
year.
Baking treatment : more than 24 hours at 65 ± 5°C
is recommended.
The LEDs should be kept at 30°C or less and 70%RH or less.
within 168 hours (7days) after opening the package.
stored in moisture proof packages, such as sealed containers with packages of moisture absorbent
material (silica gel). It is also recommended to return the LEDs to the original moisture proof bag
and to reseal the moisture proof bag again.
When storing the LEDs, moisture proof packaging with absorbent material (silica gel)
Resin materials, in particular, may contain substances which affects on silver plating,
For this reason, the moisture proof package is used to keep moisture
-4-
If unused LEDs remain, they should be
The LEDs should be soldered
A package of
Nichia STS-DA1-0226
<Cat.No.080519>
The silver