ics1893ck-40 Integrated Device Technology, ics1893ck-40 Datasheet - Page 71
ics1893ck-40
Manufacturer Part Number
ics1893ck-40
Description
3.3-v 10base-t/100base-tx Integrated Phyceiver
Manufacturer
Integrated Device Technology
Datasheet
1.ICS1893CK-40.pdf
(121 pages)
- Current page: 71 of 121
- Download datasheet (2Mb)
7.11.1 Command Override Write Enable (bit 16.15)
7.11.2 ICS Reserved (bits 16.14:11)
7.11.3 PHY Address (bits 16.10:6)
7.11.4 Stream Cipher Scrambler Test Mode (bit 16.5)
7.11.5 ICS Reserved (bit 16.4)
7.11.6 NRZ/NRZI Encoding (bit 16.3)
ICS1893CK-40, Rev. C, 06/02/09
The Command Override Write Enable bit provides an STA the ability to alter the Command Override Write
(CW) bits located throughout the MII Register set. A two-step process is required to alter the value of a CW
bit:
1. Step one is to issue a Command Override Write, (that is, set bit 16.15 to logic one). This step enables
2. Step two is to write to the register that includes the CW bit which requires modification.
Note:
IDT is reserving these bits for future use. Functionally, these bits are equivalent to IEEE Reserved bits.
When one of these reserved bits is:
•
•
IDT uses some reserved bits to invoke auxiliary functions. To ensure proper operation of the
ICS1893CK-40, an STA must maintain the default value of these bits. Therefore, IDT recommends that an
STA always write the default value of any reserved bits during all management register write operations.
These five bits hold the Serial Management Port Address of the ICS1893CK-40. During either a hardware
reset or a power-on reset, the PHY address is read from the LED interface. (For information on the LED
interface, see
Address and LED
Address bits is unaffected by a software reset.)
The Stream Cipher Scrambler Test Mode bit is used to force the ICS1893CK-40 to lose LOCK, thereby
requiring the Stream Cipher Scrambler to resynchronize.
See
This bit allows an STA to control whether NRZ (Not Return to Zero) or NRZI (Not Return to Zero, Invert on
One) encoding is applied to the serial transmit data stream in 100Base-TX mode. When this bit is logic:
•
•
Read by an STA, the ICS1893CK-40 returns a logic zero.
Written to by an STA, the STA must use the default value specified in this data sheet.
Zero, the ICS1893CK-40 encodes the serial transmit data stream using NRZ encoding.
One, the ICS1893CK-40 encodes the serial transmit data stream using NRZI encoding.
the next MDIO write to have the ability to alter any CW bit.
Section 7.11.2, “ICS Reserved (bits
The Command Override Write Enable bit is a Self-Clearing bit that is automatically reset to logic
zero after the next MII write, thereby allowing only one subsequent write to alter the CW bits in a
single register. To alter additional CW bits, the Command Override Write Enable bit must once
again be set to logic one.
ICS1893CK-40 Data Sheet Rev. C - Release
Section 5.5, “Status Interface”
Pins”). The PHY address is then latched into this register. (The value of each of the PHY
Copyright © 2009, Integrated Device Technology, Inc.
16.14:11)”, the text for which also applies here.
and
All rights reserved.
71
Section 8.2.2, “Multi-Function (Multiplexed) Pins: PHY
Chapter 7 Management Register Set
June 2009
Related parts for ics1893ck-40
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
Integrated Processor
Manufacturer:
Integrated Device Technology, Inc.
Part Number:
Description:
Integrated Riscontroller for Low-Cost Systems
Manufacturer:
Integrated Device Technology, Inc.
Part Number:
Description:
INTEGRATED RISController FOR LOW-COST SYSTEMS
Manufacturer:
Integrated Device Technology, Inc.
Part Number:
Description:
SwitchStar ATM Cell Based 1.2Gbps non-blocking Integrated Switch Controller
Manufacturer:
Integrated Device Technology, Inc.
Datasheet:
Part Number:
Description:
3.3V CMOS 16-bit bidirectional transceiver
Manufacturer:
Integrated Device Technology, Inc.
Datasheet:
Part Number:
Description:
3.3 CMOS octal buffer/line driver
Manufacturer:
Integrated Device Technology, Inc.
Datasheet:
Part Number:
Description:
Fast CMOS octal registered transceivers
Manufacturer:
Integrated Device Technology, Inc.
Datasheet:
Part Number:
Description:
Fast CMOS octal bidirectional transceivers
Manufacturer:
Integrated Device Technology, Inc.
Datasheet:
Part Number:
Description:
Fast CMOS 16-bit buffer/line driver
Manufacturer:
Integrated Device Technology, Inc.
Datasheet:
Part Number:
Description:
2.5 V/3.3 V 10 Bit High Bandwidth Bus Switch with Precharged Outputs
Manufacturer:
Integrated Device Technology, Inc.
Datasheet:
Part Number:
Description:
High-Speed CMOS Quick Switch 16:8 Multiplexer
Manufacturer:
Integrated Device Technology, Inc.
Datasheet:
Part Number:
Description:
QUICKSWITCH?? PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DOUBLE-WIDTH BUS SWITCH IDTQS32X245Q2QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DOUBLE-WIDTH BUS SWITCH
Manufacturer:
Integrated Device Technology, Inc.
Datasheet:
Part Number:
Description:
2.5V / 3.3V 16-BIT HIGH BANDWIDTH BUS SWITCH
Manufacturer:
Integrated Device Technology, Inc.
Datasheet:
Part Number:
Description:
QUICKSWITCH PRODUCTS 2.5V / 3.3V 8-BIT HIGH BANDWIDTH BUS SWITCH
Manufacturer:
Integrated Device Technology, Inc.
Datasheet:
Part Number:
Description:
QUICKSWITCH PRODUCTS 2.5V / 3.3V 10-BIT HIGH BANDWIDTH BUS SWITCH
Manufacturer:
Integrated Device Technology, Inc.
Datasheet: