ds76khz Maxim Integrated Products, Inc., ds76khz Datasheet - Page 4

• Manufacturer Part Number: ds76khz
• Description: Ds76khz 76.8khz Tcxo
• Manufacturer: Maxim Integrated Products, Inc.

NOTES:
1. All voltages are referenced to ground.
2. Typical values are at +25°C and nominal supplies.
3. This current is the active mode current sourced from the backup supply/battery.
4. These parameters are measured using a 15 pF load.
5. DS76KHz-N is tested over the industrial temperature range to meet the specifications above.
6. These parameters are measured with V
7. When V
8. These parameters are measured under no load conditions. The difference between I
9. Typical crystal aging is 1 ppm/yr after reflow.
76KHz OUTPUT WAVEFORM
MECHANICAL DIMENSIONS
operation, typically 1PPM/Volt above or below 3.0V.
to power switching circuitry.
CC
is grounded V
BAT
can operate from 2.7V to 5.5V. Freq. stability will be affected in this
CC
on under nominal operating conditions.
4 of 5
CC
and I
BAT
DS76KHz
is due