MD5811-d256-MECH M-Systems Inc., MD5811-d256-MECH Datasheet - Page 36

• Manufacturer Part Number: MD5811-d256-MECH
• Description: Mobile Diskonchip P3 Data Sheet
• Manufacturer: M-Systems Inc.

5.2
The first five blocks in Mobile DiskOnChip P3 contain foundry information, the Data Protect
structures, IPL code, and bad block mapping information. See Figure 12.
Blocks 0-4 in Mobile DiskOnChip P3 contain the following information:
33
Block 0
o
o
o
Block 1 and 2
o
Low-Level Structure of the Protected Area
Bad Block Table (page 4). Contains the mapping information on unusable erase units on
the flash media.
UID (16 bytes). This number is written during the manufacturing stage, and cannot be
altered at a later time.
Customer OTP (occupies pages 8-31). The OTP area is written once and then locked.
Data Protect Structure 0. This structure contains configuration information on one of the
two user-defined protected partitions. Block 2 is a copy of Block 1 for redundancy
purposes.
Bad Block Table and Factory-Programmed UID
Figure 12: Low Level Structure of Mobile DiskOnChip P3
Data Protect Structure 1 and IPL Code
Data Protect Structure 0
OTP
Data Sheet, Rev. 0.3
Pages 0-5
Pages 8-31
Block 0
Block 1+2
Block 3+4
Mobile DiskOnChip P3
93-SR-009-8L