160S321A1 Pacer Components, 160S321A1 Datasheet - Page 11

• Manufacturer Part Number: 160S321A1
• Description: Vacuum Fluorescent Display Module
• Manufacturer: Pacer Components

Graphic Display Module
6.5.1 BS (08 Hex, Back Space): Move cursor left
6.5.2 HT (09 Hex, Horizontal Tab): Move cursor right
6.5.3 LF (0A Hex): Move cursor down
6.5.4 US LF (1F Hex + 0A Hex): Move cursor up
6.5.5 HOM (0B Hex): Move cursor to home position
6.5.6 CR (0D Hex): Move cursor to left-end position
6.5.7 US $ x y (1F Hex + 24 Hex + xL + xH +y): Move cursor to specified position
6.5.8 CLR (0C Hex): Clear display screen
6.5.9 ESC @ (1B Hex + 40 Hex): Initialize display
6.5.10 ESC t n (1B Hex + 74 Hex + n): Select character code table
6.5.11 US MD3 (1F Hex + 03 Hex): Select horizontal scroll mode
Move the cursor one character position to the left and the display is not cleared.
Move the cursor one character position to the right.
Moves the cursor to the same column of the lower line.
Moves the cursor up one line.
Moves the cursor to the left-end position on the upper line (home position).
Home position indicates the first column of the upper line.
Moves the cursor to the left-end position on the current line.
[Range] 0 ≤ (xL + xH × 256) ≤ 559
xL: Cursor position x size lower byte (by 1 dot)
xH: Cursor position x size upper byte (by 1 dot, 0 ≤ y ≤ 2)
y: Cursor position y size (by 8 dot)
Moves the cursor to the xth column on the yth line. If a value exceeding the range is specified for x(column) and /or
y(line), this command is ignored and the cursor does not move.
Clear all the displayed characters.
After this command is executed, the cursor moves to the home position.
Resets the various display settings to their initial values.
After initializing the display, the display screen is cleared and the cursor moves to the home position.
[Range] 0 ≤ n ≤ 1
Select a character code table.
When n = 0, the PC437 is selected.
When n = 1, the PC850 is selected.
This command has no effect on data displayed before this command is received.
This command has no effect on the selected international character set.
When the font is the 8×16 dot and 16×16 dot character, this function is execution.
Selects horizontal scroll mode as the display screen mode.
Under the horizontal scroll mode, entering a character code scrolls all displayed characters one character to the left,
then displays the new character at the right end.
During execution time, if some code which is not a predefined is inputted then display is cleared, cursor moves to
home position, and inputted code should be executed automatically at home.
0 ≤ y ≤ 3
160S321A1(Rev. 3.0)
Page 11 of 13