794000-1 TE Connectivity, 794000-1 Datasheet - Page 3
![](/photos/41/79/417936/pr296642p9b_sml.jpg)
794000-1
Manufacturer Part Number
794000-1
Description
Manufacturer
TE Connectivity
Specifications of 794000-1
Product Type
Contact
Strain Relief
With
Wire/cable Type
Discrete Wire
Termination Method To Wire/cable
Crimp
Pcb Mount Retention
Without
Contact - Rated Current (a)
9
Hot Pluggable
No
Operating Voltage Reference
AC
Operating Voltage (vac)
250
Wire/cable Size (awg)
24 – 26
Wire/cable Size (mm²)
0.12 – 0.2
Wire/cable Size (cma)
236.823 – 394.705
Profile Height (y-axis) (mm [in])
1.94 [0.076]
Length (x-axis) (mm [in])
16.76 [0.6598]
Width (z-axis) (mm [in])
1.94 [0.076]
Contact Type
Socket
Contact Base Material
Phosphor Bronze
Contact Plating, Mating Area, Material
Pre-Tin
Contact Plating, Mating Area, Thickness (µm [?in])
0.4 [15.75]
Contact Design
Formed Socket
Mating Alignment
Without
Ul Voltage Rating (vac)
250
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
Operating Temperature (°c [°f])
-55 – +105 [-67 – +221]
Applies To
Wire/Cable
Accepts Wire Insulation Diameter, Range (mm [in])
0.635 – 1.27 [0.025 – 0.050]
Application Use
Wire-to-Board, Wire-to-Board / Wire-to-Wire, Wire-to-Wire
Contact Transmits (typical Application)
Signal (Data)/ Power
Packaging Method
Reel
Rev G
Physical shock.
Durability.
Contact retention.
Contact insertion force.
Mating force.
Unmating force.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 2.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
Contact shall not dislodge from
housing.
1.75 pounds maximum per contact. AMP Spec 109-41.
1 pound maximum per contact.
.25 pound minimum per contact.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
AMP Spec 109-26-7.
Subject mated samples to 50 G's
sawtooth shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 5.
AMP Spec 109-27.
Manually mate and unmate
samples and panel for 25 cycles.
AMP Spec 109-30.
Apply axial load of 10 pounds to
crimped contacts gripping wire.
Measure force necessary to insert
contact into housing.
AMP Spec 109-42,
Condition A.
Measure force necessary to mate
samples at maximum rate of .5
inch per minute.
AMP Spec 109-42,
Condition A.
Measure force necessary to
unmate samples at maximum rate
of .5 inch per minute.
AMP Spec 109-22.
Subject mated samples to 25
cycles between -55 and 85EC.
AMP Spec 109-23-3,
Condition B.
Subject mated samples to 10
cycles between 25 and 65EC at
95% RH.
AMP Spec 109-43.
Subject mated samples to
temperature life at 85EC for 300
hours.
Procedure
108-1022
3 of 7