AT32UC3A3128 Atmel Corporation, AT32UC3A3128 Datasheet - Page 39

• Manufacturer Part Number: AT32UC3A3128
• Manufacturer: Atmel Corporation

Specifications of AT32UC3A3128

• Flash (kbytes): 128 Kbytes
• Pin Count: 144
• Max. Operating Frequency: 66 MHz
• Cpu: 32-bit AVR
• # Of Touch Channels: 32
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 110
• Ext Interrupts: 110
• Usb Transceiver: 1
• Usb Speed: Hi-Speed
• Usb Interface: Device + OTG
• Spi: 6
• Twi (i2c): 2
• Uart: 4
• Lin: 4
• Ssc: 1
• Sd / Emmc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Dac Channels: 2
• Dac Resolution (bits): 16
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 128
• Self Program Memory: YES
• External Bus Interface: 1
• Dram Memory: sdram
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 3.0 to 3.6
• Operating Voltage (vcc): 3.0 to 3.6
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 6
• Output Compare Channels: 18
• Input Capture Channels: 12
• Pwm Channels: 12
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

5.2.2.1
5.2.2.2
32000D–04/2011
TLB Entry Register High Part - TLBEHI
TLB Entry Register Low Part - TLBELO
The contents of the TLBEHI and TLBELO registers is loaded into the TLB when the tlbw instruc-
tion is executed. The TLBEHI register consists of the following fields:
The contents of the TLBEHI and TLBELO registers is loaded into the TLB when the tlbw instruc-
tion is executed. None of the fields in TLBELO are altered by hardware. The TLBELO register
consists of the following fields:
• VPN - Virtual Page Number in the TLB entry. This field contains 22 bits, but the number of
• V - Valid. Set if the TLB entry is valid, cleared otherwise. This bit is written to 0 by a reset. If
• I - Instruction TLB. If set, the current TLBEHI and TLBELO entries should be written into the
• ASID - Application Space Identifier. The operating system allocates a unique ASID to each
• PFN - Physical Frame Number to which the VPN is mapped. This field contains 22 bits, but
• C - Cacheable. Set if the page is cacheable, cleared otherwise.
• G - Global bit used in the address comparison in the TLB lookup. If the MMU is operating in
• B - Bufferable. Set if the page is bufferable, cleared otherwise.
• AP - Access permissions specifying the privilege requirements to access the page. The
bits used depends on the page size. A page size of 1 kB requires 22 bits, while larger page
sizes require fewer bits. When preparing to write an entry into the TLB, the virtual page
number of the entry to write should be written into VPN. When an MMU-related exception
has occurred, the virtual page number of the failing address is written to VPN by hardware.
an access to a page which is marked as invalid is attempted, an TLB Miss exception is
raised. Valid is set automatically by hardware whenever an MMU exception occurs.
Instruction TLB. If cleared, the Data or Unified TLB should be addressed. The I bit is set by
hardware when an MMU-related exception occurs, indicating whether the error occurred in
the ITLB or the UTLB/DTLB.
process. This ASID is written into TLBEHI by the OS, and used in the TLB address match if
the MMU is running in Private Virtual Memory mode and the G bit of the TLB entry is cleared.
ASID is never changed by hardware.
the number of bits used depends on the page size. A page size of 1 kB requires 22 bits, while
larger page sizes require fewer bits. When preparing to write an entry into the TLB, the
physical frame number of the entry to write should be written into PFN.
the Private Virtual Memory mode and the G bit is set, the ASID won’t be used in the TLB
lookup.
following permissions can be set, see
Table 5-2 on page
40.
AVR32
39