CPC5621ATR Clare, CPC5621ATR Datasheet - Page 16

• Manufacturer Part Number: CPC5621ATR
• Description: IC LITELINK III FULL RING 32SOIC
• Manufacturer: Clare
• Series: LITELINK® IIIr

Specifications of CPC5621ATR

• Function: Data Access Arrangement (DAA)
• Number Of Circuits: 1
• Voltage - Supply: 3 V ~ 5.5 V
• Current - Supply: 9mA
• Power (watts): 1W
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 32-SOIC (7.5mm Width)
• Includes: Caller ID Signal Reception Function, Full-Wave Ring Detection
• For Use With: CLA165 - LITELINK III EVALUATION BOARDCLA164 - LITELINK III EVALUATION BOARD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Interface: -
• Other names: CLA321TR; CPC5621ATR

CPC2400E
16
A result code is a line of text or a number the modem
sends to the terminal to indicate the result of a com-
mand execution. Some CONNECT result codes indi-
cate the telephone line data rate. The following table
provides a list of the available result codes.
Modem Result Codes
Number
0
1
2
3
4
5
6
7
8
10
16
17
20
21
Word
OK
CONNECT
RING
NO CARRIER
ERROR
CONNECT 1200
NO DIALTONE
BUSY
NO ANSWER
CONNECT 2400
CONNECT 1200/75
CONNECT 75/1200
BLACKLISTED
DELAYED
An invalid command was issued, or there was an error at any place in the command line.
Result Code Description
Command Line Executed without errors
The modem is in the On-line state, ready to transfer data.
The modem has detected a ring signal on the telephone line. The country configuration
may disable the modem’s ability to detect a telephone line ring signal.
No carrier signal was detected when answering or placing a telephone call, or carrier
was lost during a call. The modem also returns this response message when the tele
phone line connection is broken for any reason.
The modem is in the On-line state, ready to transfer data.
No dial tone was detected when the modem took the telephone line off hook.
The modem detected a busy signal on the telephone line.
Not enough silence was detected when the @ dial modifier was used.
The modem is in the On-line state, ready to transfer data. The telephone line data rate is
2400bps.
The modem is in the On-Line state, ready to transfer data. This modem transmits at
1200 bps and receives at 75 bps.
The modem is in the On-Line state, ready to transfer data. This modemtransmits at 75
bps and receives at 1200 bps.
The modem will not allow any number to be dialed until after the modem is reset.
The modem will not allow any number to be dialed now, but will allow dialing at some
future time.
www.clare.com
Rev. 2