AT89C5131A-RDTIM Atmel, AT89C5131A-RDTIM Datasheet - Page 127
![no-image](/images/manufacturer_photos/0/0/78/atmel_sml.jpg)
AT89C5131A-RDTIM
Manufacturer Part Number
AT89C5131A-RDTIM
Description
C5131A 32K FLASH USB VQFP64 IND, 5V
Manufacturer
Atmel
Datasheet
1.AT89C5131A-RDTIM.pdf
(176 pages)
- Current page: 127 of 176
- Download datasheet (3Mb)
Control Transactions
Setup Stage
Data Stage: Control Endpoint
Direction
Status Stage
4136C–USB–04/05
The DIR bit in the UEPSTAX register will be at 0.
Receiving Setup packets is the same as receiving Bulk Out packets, except that the
RXSETUP bit in the UEPSTAX register is set by the USB controller instead of the
RXOUTB0 bit to indicate that an Out packet with a Setup PID has been received on the
Control endpoint. When the RXSETUP bit has been set, all the other bits of the UEP-
STAX register are cleared and an interrupt is triggered if enabled.
The firmware has to read the Setup request stored in the Control endpoint FIFO before
clearing the RXSETUP bit to free the endpoint FIFO for the next transaction.
The data stage management is similar to Bulk management.
A Control endpoint is managed by the USB controller as a full-duplex endpoint: IN and
OUT. All other endpoint types are managed as half-duplex endpoint: IN or OUT. The
firmware has to specify the control endpoint direction for the data stage using the DIR bit
in the UEPSTAX register.
The firmware has to use the DIR bit before data IN in order to meet the data-toggle
requirements:
•
•
To send a STALL handshake, see “STALL Handshake” on page 128.
The DIR bit in the UEPSTAX register will be reset at 0 for IN and OUT status stage.
The status stage management is similar to Bulk management.
•
•
If the data stage consists of INs,
the firmware has to set the DIR bit in the UEPSTAX register before writing into the
FIFO and sending the data by setting to 1 the TXRDY bit in the UEPSTAX register.
The IN transaction is complete when the TXCMPL has been set by the hardware.
The firmware will clear the TXCMPL bit before any other transaction.
If the data stage consists of OUTs,
the firmware has to leave the DIR bit at 0. The RXOUTB0 bit is set by hardware
when a new valid packet has been received on the endpoint. The firmware must
read the data stored into the FIFO and then clear the RXOUTB0 bit to reset the
FIFO and to allow the next transaction.
For a Control Write transaction or a No-Data Control transaction, the status stage
consists of a IN Zero Length Packet (see “Bulk/Interrupt IN Transactions in
Standard Mode” on page 123). To send a STALL handshake, see “STALL
Handshake” on page 128.
For a Control Read transaction, the status stage consists of a OUT Zero Length
Packet (see “Bulk/Interrupt OUT Transactions in Standard Mode” on page 121).
AT89C5131
125
Related parts for AT89C5131A-RDTIM
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![AT89C5131A-L](/images/manufacturer_photos/0/0/79/atmel_corporation_tmb.jpg)
Part Number:
Description:
Manufacturer:
Atmel Corporation
Datasheet:
![AT89C5131A-M](/images/manufacturer_photos/0/0/79/atmel_corporation_tmb.jpg)
Part Number:
Description:
Manufacturer:
Atmel Corporation
Datasheet:
![AT89C5131A-PUTUM](/photos/12/13/121309/313-32-qfn_tmb.jpg)
Part Number:
Description:
IC 8051 MCU FLASH 32K USB 32QFN
Manufacturer:
Atmel
Datasheet:
![AT89C5131A-S3SUM](/photos/12/13/121324/453-52-plcc_tmb.jpg)
Part Number:
Description:
IC 8051 MCU FLASH 32K USB 52PLCC
Manufacturer:
Atmel
Datasheet:
![AT89C5131A-PLTUL](/photos/7/34/73471/48-vqfn-6_543-5130_01-4_tmb.jpg)
Part Number:
Description:
IC MCU 32KB 3-3.6V USB 48-VQFN
Manufacturer:
Atmel
Datasheet:
![AT89C5131A-TIRUL](/photos/6/82/68295/453-28-soic_tmb.jpg)
Part Number:
Description:
MCU 8051 32K FLASH USB 28-SOIC
Manufacturer:
Atmel
Datasheet:
![AT89C5131A-RDTUM](/photos/6/81/68127/313-64-vqfp_tmb.jpg)
Part Number:
Description:
IC 8051 MCU FLASH 32K USB 64VQFP
Manufacturer:
Atmel
Datasheet:
![AT89C5131A-RDTUL](/photos/6/81/68127/313-64-vqfp_tmb.jpg)
Part Number:
Description:
MCU 8051 32K FLASH USB 64-VQFP
Manufacturer:
Atmel
Datasheet:
![AT89C5131A-TISUL](/photos/6/82/68295/453-28-soic_tmb.jpg)
Part Number:
Description:
MCU 8051 32K FLASH USB 28-SOIC
Manufacturer:
Atmel
Datasheet:
![AT89C5131A-S3SUL](/photos/12/13/121324/453-52-plcc_tmb.jpg)
Part Number:
Description:
MCU 8051 32K FLASH USB 52-PLCC
Manufacturer:
Atmel
Datasheet:
![AT89C5131A-PLTIL](/photos/7/34/73471/48-vqfn-6_543-5130_01-4_tmb.jpg)
Part Number:
Description:
IC 8051 MCU FLASH 32K USB 48QFN
Manufacturer:
Atmel
Datasheet:
![AT89C5131A-RDTIL](/photos/6/81/68127/313-64-vqfp_tmb.jpg)
Part Number:
Description:
IC 8051 MCU FLASH 32K USB 64VQFP
Manufacturer:
Atmel
Datasheet:
![AT89C5131A-PUTIM](/photos/12/13/121309/313-32-qfn_tmb.jpg)
Part Number:
Description:
IC 8051 MCU FLASH 32K USB 32QFN
Manufacturer:
Atmel
Datasheet:
![AT89C5131A-S3SIM](/photos/12/13/121324/453-52-plcc_tmb.jpg)
Part Number:
Description:
IC 8051 MCU FLASH 32K USB 52PLCC
Manufacturer:
Atmel
Datasheet: