AME8805BEGT AME, AME8805BEGT Datasheet - Page 10

• Manufacturer Part Number: AME8805BEGT
• Description: Low Dropout (LDO) Regulators 3.0V 600mA CMOS
• Manufacturer: AME

Specifications of AME8805BEGT

• Number Of Outputs: 1
• Polarity: Positive
• Input Voltage Max: 7 V
• Output Voltage: 3 V
• Output Type: Fixed
• Dropout Voltage (max): 0.6 V at 600 mA
• Output Current: 600 mA
• Line Regulation: 0.1 %
• Load Regulation: 1 %
• Voltage Regulation Accuracy: 1.5 %
• Maximum Power Dissipation: 0.625 W
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: SOT-223
• Minimum Operating Temperature: - 40 C
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

n Detailed Description
tain a PMOS pass transistor, voltage reference, error am-
plifier, over-current protection, and thermal shutdown.
error amplifier, over-current shutdown, and thermal pro-
tection circuits. During normal operation, the error ampli-
fier compares the output voltage to a precision reference.
Over-current and Thermal shutdown circuits become ac-
tive when the junction temperature exceeds 150
the current exceeds 600mA. During thermal shutdown,
the output voltage remains low. Normal operation is re-
stored when the junction temperature drops below 120
rent mode when the load exceeds the rated output cur-
rent. This prevents over-stress. The AME8805/8813 also
incorporates current foldback to reduce power dissipa-
tion when the output is short circuited. This feature be-
comes active when the output drops below 0.8 volts, and
reduces the current flow by 65%. Full current is restored
when the voltage exceeds 0.8 volts.
10
AME8805 / 8813
The AME8805/8813 family of CMOS regulators con-
The P-channel pass transistor receives data from the
The AME8805/8813 switches from voltage mode to cur-
AME
o
C, or
o
C.
n External Capacitors
to ground of 2.2 F or greater. Ceramic capacitors have
the lowest ESR, and will offer the best AC performance.
Conversely, Aluminum Electrolytic capacitors exhibit the
highest ESR, resulting in the poorest AC response. Un-
fortunately, large value ceramic capacitors are compara-
tively expensive. One option is to parallel a 0.1 F ce-
ramic capacitor with a 10 F Aluminum Electrolytic. The
benefit is low ESR, high capacitance, and low overall cost.
put and ground to stabilize Vin. The input capacitor should
be at least 0.1 F to have a beneficial effect.
the pins. A "Quiet" ground termination is desirable. This
can be achieved with a "Star" connection.
The AME8805/8813 is stable with an output capacitor
A second capacitor is recommended between the in-
All capacitors should be placed in close proximity to
600mA CMOS LDO
Rev.R.11