EP3SL150F1152C3N Altera, EP3SL150F1152C3N Datasheet - Page 325

• Manufacturer Part Number: EP3SL150F1152C3N
• Description: IC STRATX III FPGA 150K 1152FBGA
• Manufacturer: Altera
• Series: Stratix® IIIr

Specifications of EP3SL150F1152C3N

• Number Of Logic Elements/cells: 142500
• Number Of Labs/clbs: 5700
• Total Ram Bits: 6390
• Number Of I /o: 744
• Voltage - Supply: 0.86 V ~ 1.15 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 1152-FBGA
• For Use With: 544-2568 - KIT DEVELOPMENT STRATIX III
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Other names: 544-2408; EP3SL150F1152C3NES

Stratix III Hot-Socketing Specifications
Stratix III Devices Can Be Driven Before Power Up
© March 2010
SIII51010-1.7
Altera Corporation
This chapter describes information about hot-socketing specifications, power-on reset
(POR) requirements, and their implementation in Stratix
Stratix III devices offer hot socketing, also known as hot plug-in or hot swap, and
power sequencing support without the use of any external devices. You can insert or
remove a Stratix III device or a board in a system during system operation without
causing undesirable effects to the running system bus or board that is inserted into the
system.
The hot socketing feature also removes some of the difficulty when you use Stratix III
devices on PCBs that contain a mixture of 3.3-, 3.0-, 2.5-, 1.8-, 1.5-, and 1.2-V devices.
With the Stratix III hot socketing feature, you no longer need to ensure a proper
power-up sequence for each device on the board.
The Stratix III hot-socketing feature provides:
■
■
■
This section also describes the POR circuitry in Stratix III devices. POR circuitry keeps
the devices in the reset state until the power supplies are within operating range.
Stratix III devices are hot-socketing compliant without the need for external
components or special design requirements. Hot socketing support in Stratix III
devices has the following advantages:
■
■
■
You can drive signals into I/O pins, dedicated input pins, and dedicated clock pins of
Stratix III devices before or during power up or power down without damaging the
device. Stratix III devices support power up or power down of the power supplies in
any sequence in order to simplify system-level design.
Board or device insertion and removal without external components or board
manipulation
Support for any power-up sequence
I/O buffers non-intrusive to system buses during hot insertion
You can drive the device before power-up without damaging it.
I/O pins remain tri-stated during power-up. The device does not drive out before
or during power-up, thereby not affecting other buses in operation.
You can insert a Stratix III device into or remove it from a powered-up system
board without damaging or interfering with normal system/board operation.
10. Hot Socketing and Power-On Reset in
®
Stratix III Devices
III devices.
Stratix III Device Handbook, Volume 1