1980-1007 BLUE CHIP TECHNOLOGY, 1980-1007 Datasheet

CARD, DATA ACQUISITION, PCI-PIO

1980-1007

Manufacturer Part Number
1980-1007
Description
CARD, DATA ACQUISITION, PCI-PIO
Manufacturer
BLUE CHIP TECHNOLOGY
Datasheet

Specifications of 1980-1007

Interface Type
PCI
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Datasheet: PCI-PIO
Key Features
8255 compatible, inputs & outputs
3 on-board 16 bit Counter Timers (8254
compatible)
Facility to fit pull up/down resistors on inputs
Supplied with demonstration software
examples
Fully Universal PCI and Plug -and-play
compliant (compatible with 3.3V and 5V buses)
48 Channel Programmable Input/Output Card
Certificate No FM 33069
BS EN ISO 9001:2000
The PCI-PIO is a PCI-compatible half-card which provides
digital input/outputs and counter/timers. There are 48 TTL-
compatible programmable digital input/outputs available
from the board. If the controlling devices are used in
handshake mode, the handshake lines are available as
interrupt sources.
There are also three programmable counter/timers, the
enable and clock inputs being available externally, if
required. The outputs are accessible externally or as interrupt sources. A 4MHz crystal oscillator is
available on board to allow the counter/timers to act as accurate timebases. All input/output lines are
available at an industry standard 50 way D-type plug connector. One PCI interrupt line may be
selectively driven by the seven interrupt sources on the board, the interrupting source being readily
identified by the board.
Number Of I/O Channels
Signal Levels
Outputs
Drive Current
Input Loading
Counters/Timers
Onboard Oscillator
Interrupt Sources
Interrupt Levels Supported All PCI interrupts
Address Overhead
Board Power Requirement
Signal Connections
Dimensions
48 arranged as 2 x 3 x 8 I/O bits
5 Volt TTL Logic Levels
Logic Low Level: 0 Volts (min.) - 0.4 Volts (max.) @ IOL = 2.5mA
Logic High Level: 3.5 Volts (min.) - 5 Volts (max.) @ IOH = -400mA
2.5 mA. (Logic Low) Vout = 0.4 Volts,
3 x 16 Bit. Counter/timers
0,1 and 2 may be cascaded to provide a single 48 bit Counter/timer.
All Counter/timers may be clocked externally at a maximum rate of 4 Mhz.
Frequency 4MHz. Stability ± 100ppm 0 - 70°C
Register selectable to 3 Counter/timer outputs, and 4 PIO handshake control
lines.
16 contiguous addresses in 16 byte block
1 x 50 way male ‘D-type’ plug
125 (L) x 91 (H) board only, 135 (L) x 122 (H) x 22 (W) including bracket
+3.3 Volts, 0.5 W maximum, +5 Volts, 0.6 W maximum
Technical Specification
Blue Chip
1 metre cable with IDC and D type
connector (P/N 1371 0071)
50 way screw terminal adapter
(P/N 1981-0004)
Windows® 98/2000, NT® and
XP® drivers
Technology
Options

Related parts for 1980-1007

Related keywords