NS8-ATT02 Omron, NS8-ATT02 Datasheet - Page 200

• Manufacturer Part Number: NS8-ATT02
• Description: NT600M/G/NT610C/G/NT612 TO NS8
• Manufacturer: Omron

Specifications of NS8-ATT02

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

6-3 PT Settings
6-3-5
6-26
Backlight Brightness
NS15
The brightness of the backlight can be set to any of three levels or to an external adjustment.
The default setting is for High.
Perform the following procedure from the PT Operation Tab Page of the System Menu to set
the brightness of the backlight.
1. Select one of the three levels, High, Middle, or Low, or select External for the backlight
2. Press the Write Button. The setting will be saved.
3. If External is set, the following dialog box will be displayed to confirm writing the PT set-
4. The following confirmation dialog box will be displayed if the Yes Button is pressed.
Press the Yes Button to write the PT settings.
Press the No Button to cancel writing the PT settings.
Press the OK Button to write the PT settings, including the backlight bright-
ness.
If 15 s elapses without the OK Button being pressed or the Close Button is
pressed, the backlight brightness and other PT settings will not be written.
If External is selected, the external brightness adjustment of the NS15 can
be set. Refer to 3-10 External Brightness Adjustment for information on the
external brightness adjustment connector.
brightness.
tings when the Write Button is pressed.