1-178288-3 TE Connectivity, 1-178288-3 Datasheet - Page 12

• Manufacturer Part Number: 1-178288-3
• Description: PLUG & SOCKET HOUSING, RECEPTACLE, NYLON
• Manufacturer: TE Connectivity
• Type: Housingr
• Series: Dynamic D-3100r

Specifications of 1-178288-3

• Number Of Contacts: 3POS
• Number Of Contact Rows: 1
• Body Orientation: Straight
• Pitch (mm): 3.81mm
• Gender: RCP
• Housing Material: Nylon
• Operating Temp Range: -55C to 105C
• Voltage Rating Max: 250VAC
• Housing Color: Black
• Product Height (mm): 7.15mm
• Product Depth (mm): 22.8mm
• No. Of Positions: 3
• Pitch Spacing: 3.81mm
• Voltage Ac: 250V
• Connector Type: Plug & Socket
• No. Of Contacts: 3
• Rohs Compliant: Yes
• Voltage Rating: 250 V
• Insert / Contact Gender: Female
• Number Of Positions / Contacts: 3
• Product Type: Receptacle Housings
• Termination Style: Wire
• Keyed: Yes
• Product Series: D-3100S
• Keying: X
• Voltage Rating (vac): 250
• Number Of Positions: 3
• Number Of Rows: 1
• Contact Type: Socket
• Connector Style: Receptacle
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Packaging Quantity: 250
• Packaging Method: Bag
• Lead Free Status / RoHS Status: Compliant
• For Use With: D-3100S Dynamic Series Connectors
• Lead Free Status / Rohs Status: Details

Rev. J5
4.4 品質確認検査
4.3 製品の合格
該当する品質検査計画書には、使用するサン
プリングの合格品質水準を規定しておくこと。
寸法と機能に関する必要条件は、該当する製品
図面と本規格に準拠していること。
製品性能の合格は、Fig.3の要求条件に製品が
合格することを証明して行うこと。試験の器
具、設備試験方法の組立て方や、試験者の不
慣れに起因する試験結果不良は、製品性能の
不合格と見なさない。万一こうした理由で不
良結果を生じた時は、不良原因を修正する手
段をとり、製品認定試験に必要な試料を再び
選定し、再試験を実施すること。
再試験実施前には、修正手段の適正を確認す
る試験を行うこと。
Product Specification
製品規格
4.3 Acceptance:
4.4 Quality Conformance Inspection:
Acceptance is based on verification that the
product meets the requirements of Figure.3
Failures attributed to equipment,test get up,
or operator deficiencies shall not disqualify
the product. When product failure
occurs,corrective action shall be taken and
samples resubmitted for qualification.
Testing to confirm corrective action is
required before resubmittal.
The applicable quality inspection plan
will specify the sampling acceptable quality
level to be used. Dimensional and functional
requirements shall be in accordance with the
applicable product drawing and this
specification.
108-5349
12 of 12