AVR-M32 Olimex Ltd., AVR-M32 Datasheet - Page 2

• Manufacturer Part Number: AVR-M32
• Description: Microcontroller Modules & Accessories HDR BRD FOR AVR-JTAG OR AVR-JTAG-USB
• Manufacturer: Olimex Ltd.

Specifications of AVR-M32

• Product: Microcontroller Modules
• Data Bus Width: 8 bit
• Core Processor: ATMega32
• Clock Speed: 16 MHz
• Interface Type: JTAG
• Operating Supply Voltage: 5 V
• Board Size: 2 in x 0.73 in
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

INTRODUCTION
BOARD FEATURES
ELECTROSTATIC WARNING
BOARD USE REQUIREMENTS
AVR-M32 is header board with JTAG connector and Atmega32 – 8-bit
Microcontroller with 16K Bytes In-System Programmable Flash.
–
–
–
–
–
–
–
The AVR-M32 board is shipped in protective anti-static packaging. The board must
not be subject to high electrostatic potentials. General practice for working with
static sensitive devices should be applied when working with this board.
Cables: The cable you will need depends on the programmer/debugger you use. If
you use AVR-JTAG you will need RS232, if you use AVR-USB-JTAG you will need
1.8 m A-B USB cable.
Hardware: One of OLIMEX Programmers/Debuggers – AVR-JTAG,
JTAG, or other compatible Programmer/Debugger.
Software: AVR C compiler.
JTAG 5x2 pin connector for in-circuit programming and debugging with AVR-
JTAG-L or AVR-JTAG-USB
pin to pin compatible to AT90S8535 and may be used with AVR-P40B-8535-
xMhz prototype boards
ATMega32-16AC avr microcontroller
power supply filtering capacitors
extension pin headers for each uC pin
FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
dimensions 51x19 mm (2"x0.73")
Page2
AVR-USB-