GP2W3270XP0F Sharp Microelectronics, GP2W3270XP0F Datasheet - Page 9

• Manufacturer Part Number: GP2W3270XP0F
• Description: Fiber Optic Transmitters, Receivers, Transceivers 115kb bidirectional 890nm 20cm 3V
• Manufacturer: Sharp Microelectronics

Specifications of GP2W3270XP0F

• Product: Transceiver
• Data Rate: 115.2 Kbps
• Wavelength: 890 nm
• Maximum Rise Time: 600 ns, 60 ns
• Maximum Fall Time: 600 ns, 60 ns
• Pulse Width Distortion: 80 us, 2.25 us
• Operating Supply Voltage: 2.4 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 25 C
• Package / Case: Ultra Small Profile
• Idle Current, Typ @ 25° C: 70µA
• Link Range, Low Power: 20cm
• Operating Temperature: -40°C ~ 85°C
• Orientation: Top View
• Shutdown: *
• Size: 8.3mm x 2.1mm x 1.7mm
• Standards: IrPHY 1.4
• Supply Voltage: 2.4 V ~ 3.6 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

■
(1) When the system (program) is designed, the Turn Around Time shall be secured by considering 500 μs or
(2) As it is necessary 200 μs or more (at Ta =25 °C, no input signal) to return from shut-down mode to ready-
(3) When there is much external disturbing light source is located near this transceiver and the detector face
(4) In case that this sensor is adopted in IR communication system, please use it according to the signal method
(5) In circuit designing, make allowance for the degradation of light emitting diode output that results from long
Notes
Also, please confirm thoroughly the operation in actual application.
more that is specified to IrDA.
Then, this Turn Around Time means the time when this device does not temporarily detect the signal light,
since the transmitted light form the transceiver reaches the detector side of the transceiver.
operation mode, please consider this point at the system (program) designing.
resceiver much external disturbing light, there is case that the pulse other than signal output is generated
as noise on output terminal of this transceiver. Please consider the lay-out and structure to reduce disturbing
light on the detector face.
which is specified by [Serial Infrared Physical Layer Link Specification Version 1.4] published by Infrared
Data Association. False operation may happen if the different signal method is used.
continuous operation. ( 50 % degradation/5 years)
9
GP2W3270XP0F
Sheet No.: E3-A01201EN