142-0207-016 JOHNSON/EMERSON, 142-0207-016 Datasheet

no-image

142-0207-016

Manufacturer Part Number
142-0207-016
Description
RF/COAXIAL, SMA PLUG, STR, 50OHM, CLAMP
Manufacturer
JOHNSON/EMERSON
Datasheet

Specifications of 142-0207-016

Body Style
Straight Plug
Coaxial Termination
Clamp
Rg Cable Type
RG-58, 141, 303
Contact Material
Brass
Contact Plating
Nickel
Connector Type
SMA Coaxial
Impedance
50ohm
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Johnson Components
SMA 50 Ohm
Straight Clamp Type Plug - Captivated Contact
RG-58/U, 141, 303, 55, 142, 223, 400
CABLE TYPE
TM
• P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-833-6287 • www.johnsoncomponents.com
1.15 + .01 f (GHz) 0-12.4 GHz
VSWR & FREQ. RANGE
RG-58/u, 141, 303
GOLD PLATED
GROUP
CABLE
142-0207-011
1. Identify connector parts. (6 piece parts - except bulkhead)
2. Strip cable to dimensions shown. Do not nick braid or cen-
3. Flare braid and slide cable into clamp stem. Place rear
4. Arrange braid uniformly around clamp stem. Slide center
ter conductor. A wire stripper of correct size is recommended
for this step. Twist stranded center conductor into tight
bundle and tin (optional). Slide clamp nut and clamp cone
onto cable as shown. Clamp cone must be oriented as
shown for each size of cable. The RG-58/142 clamp cone
slides over braid and against jacket.
insulator and center contact over center conductor and po-
sition as shown for different cable sizes. Solder center con-
ductor to contact through the solder hole. Solder must not
be allowed to gather and run on outside of contact. Use a
minimum amount of solder for a good joint. .020 (0.51) di-
ameter solder is recommended.
contact assembly into body. Slide clamp nut against clamp
cone and braid and tighten to 10 in.-lb. torque.
142-0207-011/016
NICKEL PLATED
NUMBER
142-0207-016
PART
.225 (5.72)
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
“A”
.895 (22.73)
“A”
.145 (3.68)
“B”
NONE
“C”

Related parts for 142-0207-016

142-0207-016 Summary of contents

Page 1

... Slide clamp nut against clamp cone and braid and tighten to 10 in.-lb. torque. CABLE GROUP RG-58/u, 141, 303 INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE UPON REQUEST NICKEL PLATED “A” 142-0207-016 .895 (22.73) PART NUMBER “A” “B” 142-0207-011/016 .225 (5.72) .145 (3.68) “ ...

Page 2

... MHz) Connectors for RG-178 ................................................................... 335 Connectors for RG-316; LMR-100, 195, 200 .................................. 500 Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid, .141 semi-rigid cable w/o contact, uncabled receptacles .............. 670 Connectors for .141 semi-rigid with contact and adapters ............ 1000 Power Rating (Dummy Load): 0.5 watt @ + 25 C, derated to 0.25 watt @ ...

Page 3

SMA - 50 Ohm Connectors Specifications Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290 Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003" min. Female - beryllium copper per QQ-C-530, gold ...

Related keywords