PLD-12 Panduit Corp, PLD-12 Datasheet - Page 104

• Manufacturer Part Number: PLD-12
• Description: Pre-printed Marker Labels
• Manufacturer: Panduit Corp
• Series: PAN-CODE™r
• Type: Labelr

Specifications of PLD-12

• Label Type: CIRCUIT NO., LOCATION
• Label Size: 1.500" x 1.000" (38.10mm x 25.40mm)
• Color: Orange Legend, White Background
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: Warning
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

1910.147(f)
Additional requirements.
1910.147(f)(1)
Testing or positioning of machines, equipment or components thereof.
In situations in which lockout or tagout devices must be temporarily removed
from the energy isolating device and the machine or equipment energized
to test or position the machine, equipment or component thereof, the
following sequence of actions shall be followed:
1910.147(f)(1)(i)
Clear the machine or equipment of tools and materials in accordance
with paragraph (e)(1) of this section;
1910.147(f)(1)(ii)
Remove employees from the machine or equipment area in accordance
with paragraph (e)(2) of this section;
1910.147(f)(1)(iii)
Remove the lockout or tagout devices as specified in paragraph (e)(3)
of this section;
1910.147(f)(1)(iv)
Energize and proceed with testing or positioning;
1910.147(f)(1)(v)
Deenergize all systems and reapply energy control measures in accordance
with paragraph (d) of this section to continue the servicing and/or
maintenance.
1910.147(f)(2)
Outside personnel (contractors, etc.).
1910.147(f)(2)(i)
Whenever outside servicing personnel are to be engaged in activities
covered by the scope and application of this standard, the on-site employer
and the outside employer shall inform each other of their respective lockout
or tagout procedures.
..1910.147(f)(2)(ii)
1910.147(f)(2)(ii)
The on-site employer shall ensure that his/her employees understand and
comply with the restrictions and prohibitions of the outside employer's energy
control program.
1910.147(f)(3)
Group lockout or tagout.
1910.147(f)(3)(i)
When servicing and/or maintenance is performed by a crew, craft,
department or other group, they shall utilize a procedure which affords the
employees a level of protection equivalent to that provided by the
implementation of a personal lockout or tagout device.
1910.147(f)(3)(ii)
Group lockout or tagout devices shall be used in accordance with the
procedures required by paragraph (c)(4) of this section including, but not
necessarily limited to, the following specific requirements:
H12