PLD-12 Panduit Corp, PLD-12 Datasheet - Page 103

• Manufacturer Part Number: PLD-12
• Description: Pre-printed Marker Labels
• Manufacturer: Panduit Corp
• Series: PAN-CODE™r
• Type: Labelr

Specifications of PLD-12

• Label Type: CIRCUIT NO., LOCATION
• Label Size: 1.500" x 1.000" (38.10mm x 25.40mm)
• Color: Orange Legend, White Background
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: Warning
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

For service and technical support, call 800-777-3300 or visit www.panduit.com.
1910.147(e)
Release from lockout or tagout. Before lockout or tagout devices are
removed and energy is restored to the machine or equipment, procedures
shall be followed and actions taken by the authorized employee(s) to ensure
the following:
1910.147(e)(1)
The machine or equipment. The work area shall be inspected to ensure
that nonessential items have been removed and to ensure that machine or
equipment components are operationally intact.
1910.147(e)(2)
Employees.
1910.147(e)(2)(i)
The work area shall be checked to ensure that all employees have been
safely positioned or removed.
1910.147(e)(2)(ii)
After lockout or tagout devices have been removed and before a machine or
equipment is started, affected employees shall be notified that the lockout or
tagout device(s) have been removed.
1910.147(e)(3)
Lockout or tagout devices removal. Each lockout or tagout device shall be
removed from each energy isolating device by the employee who applied the
device. Exception to paragraph (e)(3): When the authorized employee who
applied the lockout or tagout device is not available to remove it, that device
may be removed under the direction of the employer, provided that specific
procedures and training for such removal have been developed,
documented and incorporated into the employer's energy control program.
The employer shall demonstrate that the specific procedure provides
equivalent safety to the removal of the device by the authorized employee
who applied it. The specific procedure shall include at least the following
elements:
1910.147(e)(3)(i)
Verification by the employer that the authorized employee who applied the
device is not at the facility:
1910.147(e)(3)(ii)
Making all reasonable efforts to contact the authorized employee to inform
him/her that his/her lockout or tagout device has been removed; and
1910.147(e)(3)(iii)
Ensuring that the authorized employee has this knowledge before he/she
resumes work at that facility.
..1910.147(f)
OSHA Standard 29CFR
The Control of Hazardous Energy
(Lockout/Tagout) 1910.147 (continued)
H11