19-050.005 EAO, 19-050.005 Datasheet - Page 11

• Manufacturer Part Number: 19-050.005
• Description: Indicator
• Manufacturer: EAO

Specifications of 19-050.005

• Actuator Diameter: 9mm
• Switch Operation: OFF-(ON)
• Contact Current Max: 100mA
• Leaded Process Compatible: Yes
• Switch Terminals: Solder Lug
• Illumination: Illuminated
• Actuator Style: Round
• Rohs Compliant: Yes
• For Use With: 19 Series Indicators / Illuminated Pushbuttons
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Technical Data
Switching system
Material
Mechanical characteristics
Electrical characteristics
Environmental conditions
Actuator with snap-action switching element
Single-break, snap-action switching system.
1 normally open contact
Material of contact
Gold plated Silver, Silver plated
Switch housing
Polyetherimide (PEI), self-extinguishing
Actuator housing
Polyphenyleneoxide (PPO), self-extinguishing, colour black
Terminals
Universal terminal:
Max. wire diameter 2 x 0.8 mm
Max. wire cross-section of stranded cable 1 x 0.75 mm²
Plug-in terminal: 2.0 x 0.5 mm
For these terminals we can also supply a plug-in base which, when
soldered on to the board, enables the switch to be plugged in.
Tightening torque
for fixing nut max. 20 Ncm
Actuating force
1.6 N
Actuating travel
2.8 mm ±0.2 mm
Mechanical lifetime
2 million operations
Switch rating
Silver plated:
Max. 50 VAC / 72 VDC, 0.8 A or 50 W
Min. 20 V, 10 mA
Gold plated:
Max. 50 VAC / 72 VDC, 100 mA or 5 W
Min. 100 μV, 50 μA
Electric strength
2500 VAC, 50 Hz, 1 min. between all terminals and earth, as per
IEC 60512-2-11
Storage temperature
-40 °C ... +85 °C
Service temperature
without illumination -25 °C ... +65 °C
with incandescent lamp -25 °C ... +45 °C
with LED -25 °C ... +65 °C
for indicators and illuminated pushbuttons mounted as a block,
make sure the heat can escape freely
Protection degree
IP 40 front side, as per IEC 60529
12
05.2007
Approvals
>
Switching system
Material
Mechanical characteristics
Electrical characteristics
Environmental conditions
Actuator with low level switching element
RoHS compliant
This low-level switching system was designed for switching low
powers in electronic circuits. The switching system assures reliable
switching of loads.
Single-break momentary contact, as normally open or normally
closed with 4 independent points of contact.
Special features are the long life, extremely short rebound time and
stable contact resistance.
1 normally open or 1 normally closed contact.
Material of contact
Gold plated
Actuator housing
Polyphenyleneoxide (PPO), self-extinguishing, colour black
Terminals
Universal terminal:
Max. wire diameter 2 x 0.8 mm
Max. wire cross-section of stranded cable 1 x 0.75 mm²
Plug-in terminal: 2.0 x 0.5 mm
For these terminals we can also supply a plug-in base which, when
soldered on to the board, enables the switch to be plugged in.
Tightening torque
for fixing nut max. 20 Ncm
Actuating force
1.8 N ±0.3 N
Actuating travel
2.8 mm ±0.2 mm
Rebound time
Typ. <100 μs
Mechanical lifetime
5 million operations
Contact resistance
≤50 mΩ starting value (initial) as per IEC 60512-2-2b
Switch rating
10 μA, 100 μV to 100 mA at 42 VAC/VDC
Electric strength
2500 VAC, 50 Hz, 1 min. between all terminals and earth, as per
IEC 60512-2-11
Storage temperature
-40 °C ... +85 °C
19