LP2980AIM5-3.3 National Semiconductor, LP2980AIM5-3.3 Datasheet - Page 18

• Manufacturer Part Number: LP2980AIM5-3.3
• Description: V REG LDO +3.3V, SMD, 2980, SOT235
• Manufacturer: National Semiconductor

Specifications of LP2980AIM5-3.3

• Voltage Regulator Type: Positive Fixed LDO
• Voltage, Input Max: 16V
• Voltage, Output Max: 3.3V
• Current, Output Max: 0.05A
• Voltage, Dropout: 0.12V
• Accuracy, Percentage: 0.5%
• Outputs, No. Of: 1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

www.national.com
Physical Dimensions
NOTES: UNLESS OTHERWISE SPECIFIED
1. EPOXY COATING
2. 63Sn/37Pb EUTECTIC BUMP
3. RECOMMEND NON-SOLDER MASK DEFINED LANDING PAD.
4. PIN 1 IS ESTABLISHED BY LOWER LEFT CORNER WITH RESPECT TO TEXT ORIENTATION. REMAINING PINS ARE NUMBERED COUNTER
CLOCKWISE.
5. XXX IN DRAWING NUMBER REPRESENTS PACKAGE SIZE VARIATION WHERE X1 IS PACKAGE WIDTH, X2 IS PACKAGE LENGTH AND X3 IS
PACKAGE HEIGHT.
6.NO JEDEC REGISTRATION AS OF AUG.1999.
For Order Numbers, refer to Table 1 in the “Order Information” section of this document.
inches (millimeters) unless otherwise noted (Continued)
The dimensions for X1, X2 and X3 are as given:
micro SMD, 5 Bump Package (BPA05)
NS Package Number BPA05A
X1 = 0.930 +/− 0.030mm
X2 = 1.107 +/− 0.030mm
X3 = 0.850 +/− 0.050mm
18