LP2980AIM5-3.3 National Semiconductor, LP2980AIM5-3.3 Datasheet - Page 15

no-image

LP2980AIM5-3.3

Manufacturer Part Number
LP2980AIM5-3.3
Description
V REG LDO +3.3V, SMD, 2980, SOT235
Manufacturer
National Semiconductor

Specifications of LP2980AIM5-3.3

Voltage Regulator Type
Positive Fixed LDO
Voltage, Input Max
16V
Voltage, Output Max
3.3V
Current, Output Max
0.05A
Voltage, Dropout
0.12V
Accuracy, Percentage
0.5%
Outputs, No. Of
1
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
LP2980AIM5-3.3
Manufacturer:
NS
Quantity:
1 000
Part Number:
LP2980AIM5-3.3
Manufacturer:
POL-SUN
Quantity:
2 000
Part Number:
LP2980AIM5-3.3
Manufacturer:
TI/德州仪器
Quantity:
20 000
Company:
Part Number:
LP2980AIM5-3.3
Quantity:
3 632
Part Number:
LP2980AIM5-3.3/NOPB
Manufacturer:
NS/国半
Quantity:
20 000
Typical Applications
01207851
FIGURE 5. 5V/400mA Regulator
The LP2980 can be used to control higher-current regulators, by adding an external PNP pass device. With the PNP transistors
shown in , the output current can be as high as 400 mA, as long as the input voltage is held within the Safe Operation Boundary
Curves shown below in.
To ensure regulation, the minimum input voltage of this regulator is 6V. This “headroom” is the sum of the V
of the external
BE
transistor and the dropout voltage of the LP2980.
Notes:
A. Drive this input with a logic signal (see Application Hints). If the shutdown function is not to be used, tie the ON/OFF pin directly
to the V
pin.
IN
B. Recommended devices (other PNP transistors can be used if the current gain and voltage ratings are similar).
C. Capacitor is required for regulator stability. Minimum size is shown, and may be increased without limit.
D. Increasing the output capacitance improves transient response and increases phase margin.
E. Maximum safe input voltage and load current are limited by power dissipation in the PNP pass transistor and the maximum
ambient temperature for the specific application. If a TO-92 transistor such as the MPS2907A is used, the thermal resistance from
junction-to-ambient is 180˚C/W in still air.
Assuming a maximum allowable junction temperature of 150˚C for the MPS2907A device, the following curves show the
maximum V
and I
values that may be safely used for several ambient temperatures.
IN
L
01207852
FIGURE 6. Safe Operation Boundary Curves for
Figure 5
15
www.national.com

Related parts for LP2980AIM5-3.3